Author Topic: I solved a problem but I did not understand what I did to do that (Read 3590 times)

nick1984arcade · « **on:** September 13, 2018, 08:25:03 pm »

Dear Guys,
I solved a problem but I did not understand what I did to do that.
I had problem loading ePSXe games from MA. Epsxe perfectly worked unless when I used it from MA.
Then I saw in a screenshot from another user that he had different commands in the Command Line.

I had:
-nogui -loadbin %file
psu -cdrom %file -skip_gameinfo -nowindow -ctrlr X-Arcade

He had:
%file -skip_gameinfo -nowindow

Of course I never modified Command line before
I replaced and now games are loading and most time work good (sometime I have problem loading audio with Tekken 3, sometime not)
Can someone please just explain me what I did?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: I solved a problem but I did not understand what I did to do that (Read 3590 times)

nick1984arcade

I solved a problem but I did not understand what I did to do that