| Main > Main Forum |
| Marquee light - powered by? |
| << < (2/2) |
| Ken Layton:
That's a common Midway light fixture same as used on Galaga, Ms. Pacman, Tron, etc. Wire it as follows: Black: 120 volts ac (hot) Blue: 120 volts ac (neutral) Green: frame ground The mating connector is an AMP brand Universal Mate-N-Lock 3 pin which you can get from Mouser.com as their part number 571-3507661. The pins for it are Mouser # 571-3505501. |
| Stingray:
Thanks Ken! That's what I needed to know. ;D I have the mating connector, but thanks for the information. -S |
| Ken Layton:
I just repaired one of these exact light fixtures last night on a Ms. Pacman. It had an open ballast. This fixture uses F15T8CW fluorescent tube and an FS-2 starter. If testing the ballast, a good one will read around 25 ohms of resistance. |
| Stingray:
Hopefully it works, but this is good to know if it doesn't. -S |
| Navigation |
| Message Index |
| Previous page |