Thanks, Andy.
That diagram covers pretty much everything
except the distance from the mounting plate to the shaft shoulder -- can't calculate the correct handle height without that measurement.
I'm picturing two versions of the handle.
Version 1:Like the Happ version, but using a 9mm I.D. x 18mm O.D. x 10mm high shaft collar like
this one.
- Easy remix that
anyone can do, just change a few variables in OpenSCAD, render, and export an .STL.
- Confirm the variables work with your hardware and printer using LS30_Test_Print.scad then copy those values into LS30_Handle.scad.
-- ShaftHeight (handle line 66) - probably OK as-is
-- ShaftDiameter (test line 17, handle line 69)
-- ShaftCollarHeight (test line 18, handle line 72)
-- ShaftCollarOuterDiameter (test line 19, handle line 75)
- Drill or file a flat spot on the joystick shaft for the shaft collar setscrew.
Version 2:Removable top like the original handle.
- M6 locknut and maybe a star washer or two to secure the handle to the shaft.
- No shaft mods, just print and assemble.
- No shaft collar so no setscrew hole/cover.
Scott