so its together, needs more finish work, like a nice bondo glaze and a ---steaming pile of meadow muffin--- ton of sanding and painting.
Im aware the gap between pieces is noticable, but this is just the foundation part of the "bar"
PRESENTING..... The Ginger Table!
I had a bunch of left over 2x4s from my ongoing bathroom build and a set of pinball legs, so I did this:
and added more boards to the top to be a table:
I basically cut some 2x4s to be slightly bigger than the base of Gingerballs. Added extra boards to the front and back so ginger could sit on top and I left it open on the bottom so the LED lighting on the bottom of ginger could shine through. I "counter sunk" the bolt holes in the inside with a spade bit.
I finally got all the stuff inside and wired as best I could without being sloppy, but there's only so much you can do.
PC
USB Hub
USB Wifi adapter (for my boy Rodney Black)
USB receiver for KB/Mouse
LED light strip with USB end
Motherboard
850W Power Supply
ATI video card
IPAC2
Pin2DMD
SainSmart USB Relay
7 Relays for "Force Feed Back"
17" 4:3 back glass monitor
22" Samsung PF monitor
Extra intake fan at mid body
120mm exhaust fan
Just barely enough room and still have pretty good airflow!
So put the displays back in:
And buttoned it all up.
Net step is making GingerTable® prettier. Probably just a semi gloss paint on the wood and call it a day. I used the same aluminum for the rails this time, but the edges are under the lockdown bar, so the corners arent bitey like on GB1.0. For ginger itself, the only thing really left to do is add a ---steaming pile of meadow muffin--- ton more tables.