| Main > Main Forum |
| MAME, DC, PS2, all-in-one cabinet.... my planned attempt |
| << < (8/8) |
| unicron:
I used crimpable 25 pin d-sub male / female connectors from radio shack. the inserter / extractor is also sold there for about 3 bucks. edit: yeah it was easy to do and works fine, you can get a specific d-sub crimping tool that will make crimping easier, but I used a needlenose pliars. Soldering is better but I usually use my friends soldering iron and he is out of town. The plug works great, wires do not seem loose at all. |
| Negativecreep0:
Sorry for resurrecting an old old thread but i would like to know. If i have 2 psx controllers going to two p360 and i want to connect the two psx controls to one db25 adapter, can i make it happen? Each control has up down left right (4) + 6 action (6) + start = 11 points, now can i share the ground for both p1 and p2 psx controllers. And I believe i would have to split the two +5v connections from p1 and p2 cause they go to seperate p360s.......... grand total of connections 4+6+1 (x2 controllers) = 22 +2(+5v) +1(ground) = 25 connections am i right in assuming a shared ground and seperate +5v connections? can i share the two psx grounds |
| Navigation |
| Message Index |
| Previous page |