Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: WTB: Donkey kong harness  (Read 1304 times)

0 Members and 1 Guest are viewing this topic.

GMZombie

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 379
  • Last login:March 22, 2022, 10:11:23 am
  • I am a living Legend who fixes stuff... mostly
WTB: Donkey kong harness
« on: July 17, 2018, 08:05:23 am »
i need a harness for my donkey kong 3 or at least a good place to get the edge connector so i can make my own harness. id rather just find a harness so if anyone has an extra they want to get rid of let me know. thanks

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5880
  • Last login:Today at 04:21:02 pm
  • This plan is foolproof
Re: WTB: Donkey kong harness
« Reply #1 on: July 17, 2018, 08:13:52 am »
https://www.mikesarcade.com/cgi-bin/store.pl?sku=DKC-UP44P-BARE
This is a little pricey, but if you can't find anything else...

That site also sells everything you need to build a harness from scratch.