CRT Emu Driver + Amd APU A12 9800e = Installation Error 103

[ghost13500]

Hello

Try to install CRT Emu driver on this hardware without success :

- APU A12 9800e (R7 graphics) (https://www.amd.com/en/products/apu/7th-gen-a12-9800e-apu)
- 4Go
- Fresh Windows 10 install  (build 17134)

I've downloading this driver (CRT Emudriver & CRT Tools 2.0 beta 13 (Crimson 16.2.1 for GCN* cards) for Windows 7/8/10 64-bits ) :
- https://drive.google.com/open?id=1HYtmxr_Bla3RtVww4lXDVbe7plvHKO2S


When I start setup, after "Compatibles Devices : Graphic Card VGA standard" screen, I click "Install Driver" and failed/stop installation with this message :
"Error: The driver installation failed: 103 No data Available"

Someone know how force installation ? 

[Calamity]

Similar issue here: http://forum.arcadecontrols.com/index.php?topic=154587.0

I think it may be due to the pci id not being listed in the driver's inf. If that's the case, you'll need to wait for the next Emudriver update, sorry.

[ghost13500]

Sorry for this duplicate issue

Thanks for your work on this drivers, i'll be waiting next release   

[Calamity]

If possible, post your gpu PCI id so I can check if that is the problem.

[ghost13500]

Here :

PCI\VEN_1002&DEV_9874&SUBSYS_1E311002&REV_E3

I think it is the problem,
I've just force manual installation (i've choose manually drivers folder, "AMD Radeon R7 Graphics") and that's work.

CRT Emu Driver installed and detected by Vmmaker...but I've strange slowdown's feeling when I move windows 
Also in opengl apps (like retroarch), I notice slowdowns  (It's better if  I choose direct3d driver in).

In groovymame it's ok (d3d9) but there's also some very litte slowdowns.

Perhaps it's caused by my manual/partial installation ? Or CRT EmuDrivers based version (CRIMSON 16.2.1) is too old for good performance with APU R7 ?
When i try "normal" drivers, it's ok

In all cases, I can wait next version don't worry !

[Calamity]

Thanks!