Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Microswitch problem?  (Read 980 times)

0 Members and 1 Guest are viewing this topic.

Fonkybeachbum

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 31
  • Last login:September 27, 2023, 12:10:14 pm
  • I want to build my own arcade controls!
Microswitch problem?
« on: June 06, 2018, 12:28:40 pm »
Hello, I have a cheaper flight stick in a control panel.  When going right,  I can hear the switch engage, but the right direction will only work if I wiggle the stick to just the perfect position.  All of the wiggling is done in the area where the throw has already engaged the switch, but the right will only work if it's just in the perfect spot.  Any ideas on why this is happening?  Thanks.

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4222
  • Last login:December 17, 2023, 08:05:48 am
  • I have a gaming addiction.....
Re: Microswitch problem?
« Reply #1 on: June 06, 2018, 12:30:03 pm »
Faulty microswitch, Just replace it.