Hi all, im planning to 3m Wrap my whole cabinet with a 1080 auto vinyl. I have put on 4 coats of BIN Shellac primer and sanded down to 320 I have a good smooth surface. I have a few questions before going to next steps
1. Can I apply a Vinyl wrap directly to this or do I need to first add a acrylic based paint for proper adhesion as the BIN is a oil based primer?
2. Should I set the Vinyl wet like you would on a car or do i need to do it dry?
3. Is there some other type of paint or coat I should use to get the vinyl to adhere to the cabinet?