| Main > Main Forum |
| How do I mount a Coin door light in this door? |
| << < (2/6) > >> |
| PedroSilva:
--- Quote from: eightbit on February 04, 2004, 11:12:25 am --- --- Quote from: arizonacats on February 04, 2004, 11:08:30 am --- I don't have a picture of mine right now, but I think you can check out an exploded view of one on their web site: http://www.happcontrols.com/coindoors/40003800_exploded.htm Turns out they don't show the bulbs mounted there either. :( --- End quote --- It would be great if you or someone else with this style of door could take a pic for me. They show the lightbulb and holder in the exploded diagram but its rotated the wrong way to see where or how it mounts. --- End quote --- Mine is similar ... I'll try to get a picture for you tonight ... |
| Brad Lee:
Mines got the same mech holders. It uses a little white plastic clip that snaps onto the little raised part The bulb is a wedge base, so it plugs right into the front ofthe holder, and there are 2 wire terminals coming out the back. If your coin mechs work, then they have a ground wire. SImply extend that to both of the light bulbs |
| screaming:
--- Quote from: Brad Lee on February 04, 2004, 11:46:09 am ---If your coin mechs work, then they have a ground wire. SImply extend that to both of the light bulbs --- End quote --- Okay, I'm still learning as I go with all this arcade business, so please excuse the ignorance. Can I really ground my 12v bulbs with my I-PAC (which supposedly only outputs 5v)? /Steve |
| Ken Layton:
Yes, that is a late model Happ Controls door. They sell replacement (white) wedge base lamp sockets for it. |
| SirPeale:
--- Quote from: screaming on February 04, 2004, 12:28:44 pm --- --- Quote from: Brad Lee on February 04, 2004, 11:46:09 am ---If your coin mechs work, then they have a ground wire. SImply extend that to both of the light bulbs --- End quote --- Okay, I'm still learning as I go with all this arcade business, so please excuse the ignorance. Can I really ground my 12v bulbs with my I-PAC (which supposedly only outputs 5v)? --- End quote --- Run it from your power supply. |
| Navigation |
| Message Index |
| Next page |
| Previous page |