Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Rowe R85 Help  (Read 190 times)

0 Members and 1 Guest are viewing this topic.

Jfnchr91

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Rowe R85 Help
« on: May 16, 2018, 12:35:09 pm »
I acquired a Rowe R85 Starburst (Starlight?) when I bought my current house. There is no locking mechanism on the front, but it wonít open. Is there a way to get it open? Iíve tried everything short of breaking the front door. It doesnít power on, Iím not sure if the power supply has been removed or if the cable has fallen into the machine itself, thatís why I would like to get it open to check. Iím just wanting to sell it and know nothing about it, any help would be greatly appreciated!

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1000
Re: Rowe R85 Help
« Reply #1 on: May 17, 2018, 08:10:10 am »
Hello jfnchr91,

There were 3 cabinet trim versions of the 1981 Rowe Ami R-85, these were the plain Starwood, Starburst and Starlight (this had the infinity lights and mirror ball on the bottom panel.

To open a Rowe Ami jukebox where the door lock is missing or damaged, you need a couple of flat blade screwdrivers that you put some tape around the ends of blade to protect the cabinet.
Put one screwdrive into the gap between the door and the bottom locking plate about 8 inches  (approx 200 mm) from one side of the cabinet, lift the door slightly so you can see through the gap the locking mechanism, this looks like an arrow head, with another screwdriver between the arrowhead and the metal plate it engages with, force them apart, you will notice when lock disengages on that side of the cabinet.
Put a wedge in the larger gap now so the lock that side can not re-engage. Do the same on the other side.

Now is the time to fit a new lock and sort out the issues with the jukebox.

Regards
Alan

Alan Hood
ami-man
UK

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31