Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Pandora's Box Video issue.  (Read 470 times)

0 Members and 1 Guest are viewing this topic.

arnthestampede

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 35
Pandora's Box Video issue.
« on: May 04, 2018, 05:38:54 am »
Hello, I was wondering if you knowledgeable folk could help me identify what the issue is I am having here.

I have a recently acquired Pandora's box 5S (probably a Chinese knock off) and have it hooked up to my RGB monitor directly (using R, G, B, and Sync RCA cables) the buttons and ground wires are all hard wired straight to the game board.

Boots up fine and the menu displays okay (maybe a bit over saturated) but when I boot into any game I get a strange image, the colours are all over the place and black waves go across the screen whenever any action takes place. Here is a video of SF Alpha:

https://youtu.be/GwrZE-8F11Q

I have tried linking all ground points, video ground on pin 14 only, and every combination in-between. I have also tried 2 different power supplies, a standard Jamma switching one and a 12v power cord that came with the box.

Another strange thing also happened, when I connected the box to VGA it boots up fine and image looks good but none of the buttons work?

Any help is greatly appreciated. Thanks.

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31