Arcade Collecting > Merit/JVL Touchscreen

Megatouch XL Titanium "system shutdown call distributer"

(1/3) > >>

Gary.payne:
Hi, New to the forum and hoping someone out there may be able to help me, I've just bought a countertop Megatouch XL Titanium with a fault, it boots up fine but then displays in a big red box "system shutdown call distributer" from what I can find on line it's due to a theft deterrent

Anybody know how can reset this
Thanks
Gary

lilshawn:
try a "memory clear" set the red dipswitch bank on the IO board... switches 4 & 7 remove the security key and boot up the machine

once the screen indicates "No security key detected" re-install the security key and allow the machine to boot again. this may clear this out.

failing that, you may have to reinstall the software

Gary.payne:
Looks like I've got 2 banks of dip switches ?????

lilshawn:
oops, my bad... i'm tired  :D

give THIS a try...


Keyboard clear – DOS operating system. Hard drive based games only.

XL: Gold, Platinum & Titanium(2) / Maxx: 1st release, 2K+, Diamond(2) & Emerald(2) / Force 2002(5)

-Turn off the game.
-Plug in the keyboard into the top port PS2 or purple PS2 port and then power the game up.
-Allow the game to boot up into the first menu screen.
-Press the ESC key. The screen should display C: MERIT2\
-Type in cd.. And press ENTER. C:\ prompt will appear.
-Type in del nvram.dat and press ENTER. C:\ prompt will reappear.
-Turn off the game and unplug the keyboard, then turn the game back on.

Note: If Bad Command or File name appears, the del nvram.dat was not typed correctly.


http://www.meritgames.com/Support_Center/TECH%20CLASSIC.PDF

Megatouchmike:
You emailed me on April 9.  Gave you the same response. Im assuming you didn't try it or it didn't work?

Navigation

[0] Message Index

[#] Next page