April 19, 2024, 04:17:05 pm
Home
Help
Search
Login
Register
News:
Support this site
Shop
Amazon Arcade Stuff
through our link. Thank you!
Forum notices to gmail.com addresses are working. Microsoft addresses are still not.
The NEW Build Your Own Arcade Controls
|
Main
|
Monitor/Video Forum
|
Sanyo 14" - Identify RGBS signals?
Main
Restorations
Software
Audio/Jukebox/MP3
Everything Else
Buy/Sell/Trade
Project Announcements
Monitor/Video
GroovyMAME
Merit/JVL Touchscreen
Meet Up
Retail Vendors
Driving & Racing
Woodworking
Software Support Forums
Consoles
Project Arcade
Reviews
Automated Projects
Artwork
Frontend Support Forums
Pinball
Forum Discussion
Old Boards
Raspberry Pi & Dev Board
controls.dat
Linux
Miscellaneous Arcade
Wiki Discussion
Old Archives
Lightguns
Arcade1Up
Try the site in https mode
Site News
Unread posts
|
New Replies
|
Recent posts
|
Rules
|
Chatroom
|
Wiki
|
File Repository
|
RSS
|
Submit news
« previous
next »
Send this topic
Print
Pages: [
1
]
Go Down
Author
Topic: Sanyo 14" - Identify RGBS signals? (Read 1342 times)
0 Members and 1 Guest are viewing this topic.
rocomat
Trade Count:
(
0
)
Full Member
Offline
Posts: 23
Last login:November 25, 2019, 12:10:13 pm
Sanyo 14" - Identify RGBS signals?
«
on:
April 17, 2018, 06:48:14 pm »
Hi!
Can someone help me to identify the RBG and S and Ground signals code? (cable has 5 signals) from this Sanyo 14" cocktail monitor?
I looked at the manual, I can not see RGB or Sync or what is the 5th input, I thing Ground.
Page 3 "E. Connectors" shows the pin numbers and the signal, but who knows the pin numbers from that old connector? If it would be shown that would help...
Manual:
http://files.arcadeinfo.de/Monitore/Sanyo%2014''%20Color%20TV%20Monitor.pdf
There's not print for this cable on the board.
See the white cable with diffent red dots at middle - bottom.
thanks!
«
Last Edit: April 17, 2018, 06:54:02 pm by rocomat
»
Logged
!! Looking for After Burner Deluxe cabinet plastic parts !!
rocomat
Trade Count:
(
0
)
Full Member
Offline
Posts: 23
Last login:November 25, 2019, 12:10:13 pm
Re: Sanyo 14" - Identify RGBS signals?
«
Reply #1 on:
April 17, 2018, 08:11:13 pm »
Got ist, went to the resistors and this way I could identify the cable code.
Logged
!! Looking for After Burner Deluxe cabinet plastic parts !!
buttersoft
Trade Count:
(
+1
)
Full Member
Offline
Posts: 1758
Last login:March 22, 2024, 12:55:20 am
Is running at 15kHz
Re: Sanyo 14" - Identify RGBS signals?
«
Reply #2 on:
April 17, 2018, 08:26:49 pm »
From the top down, was it R, G, B, ground, empty, sync?
Logged
Send this topic
Print
Pages: [
1
]
Go Up
« previous
next »
The NEW Build Your Own Arcade Controls
|
Main
|
Monitor/Video Forum
|
Sanyo 14" - Identify RGBS signals?