Arcade Collecting > Merit/JVL Touchscreen

Wiring Help! Mega touch controller powered by a PC wiring knowledge needed

(1/2) > >>

Garth2013:
Hi All,

Firstly, apologies but i am a noob at wiring so i will likely ask simple questions. Long story short, i nought an old Megatouch Force quiz machine which did not work (which i knew) so i have taken all the parts out and fitted an old PC. My issue is that i need to wire in the 3M touch screen controller and the audio amplifier in to the PC wiring but i have no idea how to do this!

Any help is appreciated! I can upload pics if needed but i have googled it to death but dont seem to find the information i want

Thanks,
Gareth

Titchgamer:
Some pics of what you have and what you want to connect will help.

Garth2013:
Hi, sorry see uploaded!

Garth2013:
So the first set of pics is the touch screen controller, the 2 wires and the PC. These pics are for the amp which needs a 12v supply

Thanks

Malenko:
you could skip the amp and just use PC speakers, but if you want to power the amp just get a MOLEX splitter and tap the yellow for +12V and the Black as ground.

Navigation

[0] Message Index

[#] Next page