Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Using J-PAC with an Makvision M2725C-82 monitor  (Read 580 times)

0 Members and 1 Guest are viewing this topic.

alex_bb23

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • I want to build my own arcade cabinet!
Using J-PAC with an Makvision M2725C-82 monitor
« on: April 11, 2018, 06:18:39 am »
Hello guys,

I own an Makvision M2725C-82 monitor which (according with technical specifications) can support resolutions 320 x 240 / 640 x 200. I intend to use this in combination with CRT Emudriver 2.0... So, windows desktop can run at 640 x 480i and I'm not sure if this monitor can be capable to deal with this resolution... Could somebody tell me if this will work?

Thank you!

buttersoft

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 730
  • Is running at 15kHz
Re: Using J-PAC with an Makvision M2725C-82 monitor
« Reply #1 on: April 11, 2018, 08:18:21 am »
It should work fine. Some sets handle interlaced modes better than others, with less flicker, but there's not normally a lot you can do about that.

And BTW you probably wanted to post this in the monitor/video section :)

alex_bb23

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • I want to build my own arcade cabinet!
Re: Using J-PAC with an Makvision M2725C-82 monitor
« Reply #2 on: April 11, 2018, 08:42:38 am »
It should work fine. Some sets handle interlaced modes better than others, with less flicker, but there's not normally a lot you can do about that.
Thanks to the ATI 5450 there is less flicker.
And BTW you probably wanted to post this in the monitor/video section :)
You're right! Could somebody move this post in the monitor/video section?

Thank you!

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31