Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Joining MDF together.  (Read 5730 times)

0 Members and 1 Guest are viewing this topic.

Hawk75

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:April 18, 2020, 09:39:36 pm
Joining MDF together.
« on: April 10, 2018, 08:42:14 pm »
Wondering if the side of the machine should be routed out say 1/8-1/4 inch and then the front be placed and glued in the slot, or is it out to just nail or screw it with a 1x1 inch support inside of the machine?

bperkins01

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 895
  • Last login:September 24, 2023, 02:13:35 pm
  • Plenty of skills.. gaining experience..
Re: Joining MDF together.
« Reply #1 on: April 11, 2018, 07:58:46 am »
If this is what you are talking about:



Yes it is a good idea - it provides a lot of glue surface and adds rigidity. 
I would rabbet the front and have the side go into the rabbet.  That way the joint is on the side of the cabinet - not the front.
HTH
My Arcade Cabinet Build and other projects here:
Centipede, Joust, Joust Cocktail, Asteroids, Galaga, Ms. Pacman Cabaret, Defender, Space Invaders Cocktail
https://bperkins.wordpress.com/

nipsmg

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1738
  • Last login:Today at 08:44:43 am
  • ROONEY!! ERRGH!!
    • Arcadia
Re: Joining MDF together.
« Reply #2 on: April 12, 2018, 09:15:18 am »
Is this really any "better" then gluing and screwing a supporting piece (1x2, 1x1, etc) on the inside surface and securing the piece to that?  It seems like a LOT of extra work for little extra benefit.

bperkins01

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 895
  • Last login:September 24, 2023, 02:13:35 pm
  • Plenty of skills.. gaining experience..
Re: Joining MDF together.
« Reply #3 on: April 12, 2018, 09:31:33 am »
Better? In what way? strength wise? It doesn't matter much on this style of construction - so that can be debated I suppose.
Cleaner, neater, less likely to get out of alignment, fewer screw holes to fill..
Its a more professional joint.. 

It you have a router/router table..  this is much simpler that cutting a corner brace. 
The work is relative to the tools available..
My Arcade Cabinet Build and other projects here:
Centipede, Joust, Joust Cocktail, Asteroids, Galaga, Ms. Pacman Cabaret, Defender, Space Invaders Cocktail
https://bperkins.wordpress.com/

Slippyblade

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3167
  • Last login:November 16, 2023, 11:39:51 am
  • And to the death god we say, "Not today!"
Re: Joining MDF together.
« Reply #4 on: April 12, 2018, 03:10:23 pm »
If you are gluing internal battens and screwing from the inside... there's no screw holes to fill.  Also, that's how most original cabs were made.  Granted, there are quite a few that run rabbets into dados.

bperkins01

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 895
  • Last login:September 24, 2023, 02:13:35 pm
  • Plenty of skills.. gaining experience..
Re: Joining MDF together.
« Reply #5 on: April 12, 2018, 03:57:41 pm »
If you are gluing internal battens and screwing from the inside... there's no screw holes to fill.  Also, that's how most original cabs were made.  Granted, there are quite a few that run rabbets into dados.

Fair enough  ;)  Again - I think it comes down to tools at hand.
My Arcade Cabinet Build and other projects here:
Centipede, Joust, Joust Cocktail, Asteroids, Galaga, Ms. Pacman Cabaret, Defender, Space Invaders Cocktail
https://bperkins.wordpress.com/

morton

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 336
  • Last login:July 23, 2021, 09:36:59 am
  • I want to build my own arcade controls!
Re: Joining MDF together.
« Reply #6 on: May 29, 2018, 02:49:45 pm »
There are plenty of ways to build a cabinet.

If you use battens, I would say that dadoes and rabbets are unnecessary. If you're not using battens, then dadoes and rabbets are beneficial.

My experience has shown me that dadoes and rabbets can help with glue up and keeping pieces from wandering away too much. It also will ensure a stronger overall structure, which can never hurt, especially when it doesn't come with any weight gain.

Tools on hand will probably be the biggest factor here, but if you have a router or table saw, then cutting grooves ain't that hard IMO.

1500points

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 550
  • Last login:November 20, 2018, 01:44:12 pm
    • How to succeed at Robotron
Joining MDF together.
« Reply #7 on: May 30, 2018, 09:59:34 am »
I like to use simple tools and don’t own any expensive equipment.

You can make battens out of 1x2 pine that screws internally to the mdf.

More than solid enough for an arcade cabinet but you have to be mindful of overtightening and stripping out the screws.

If you dont use glue it becomes convenient to be able to break a cab down into a flat pallet for transportation.  Gave a cab to a friend that way he was in a suv with his whole family and luggage, it still fit in.