Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Wells Gardner 25K7197 flyback replacement  (Read 1977 times)

0 Members and 1 Guest are viewing this topic.

darkairplane

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 21
  • Last login:June 06, 2018, 09:25:11 pm
  • I want to build my own arcade controls!
Wells Gardner 25K7197 flyback replacement
« on: March 23, 2018, 10:37:58 am »
Hello forum,

I would like to replace the flyback on my monitor chassis but I cannot find a 25K7197 flyback on ebay.  Will a K7000 flyback work for this chassis?  Sorry Im very new to this so Im just not sure if the K7000 flyback applies to all in the 7000 series.  The tube is a RCA A63ADT10X05 to my best knowledge from the sticker on the back.  It works ok for the moment, but what other parts can I replace to ensure long life to this monitor?   Thanks guys.





Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Wells Gardner 25K7197 flyback replacement
« Reply #1 on: March 23, 2018, 12:25:14 pm »
Yes the 7197 uses the standard K7000 flyback. Part number 053X0528-001.

Here's a link to a good quality one:

https://www.arcadepartsandrepair.com/store/monitors/monitor-flybacks/053x0528-001-wells-gardner-k7000-series-flyback/

darkairplane

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 21
  • Last login:June 06, 2018, 09:25:11 pm
  • I want to build my own arcade controls!
Re: Wells Gardner 25K7197 flyback replacement
« Reply #2 on: March 23, 2018, 01:59:06 pm »
Yes the 7197 uses the standard K7000 flyback. Part number 053X0528-001.

Here's a link to a good quality one:

https://www.arcadepartsandrepair.com/store/monitors/monitor-flybacks/053x0528-001-wells-gardner-k7000-series-flyback/

Thank you! I will order today.  Should I order anything else while Im getting the flyback?  I already replaced the caps and voltage regulator.  Thanks again!