Arcade Collecting > Merit/JVL Touchscreen

RESOLVED - Megatouch Ion - Shutting down

<< < (2/2)

otsep:

--- Quote from: mahkeymike on March 18, 2018, 05:41:16 pm ---I have never seen that screen before. It looks like there should be an image behind the text like a red NO and a green YES. This leads me to believe you have a corrupt Hard drive.

--- End quote ---

This is while booting from the DVD’s to reinstall the software.


Sent from my iPhone using Tapatalk Pro

lilshawn:
possible faulty ram slot...try swapping the ram from it's current slot, into the other slot.

possible faulty ram stick....

possible faulty CD drive...

possible faulty CD media...

possible failing CPU TIM... disconnect fan and run system in the bios screen monitoring the temperature for a few minutes and see if the heatsink gets hot as the CPU temps go up. if not, the TIM is toast and not pulling heat out of the CPU...replace thermal CPU paste. scrape that yellow crap off and replace it with some good stuff.

otsep:

--- Quote from: lilshawn on March 18, 2018, 10:26:10 pm ---possible failing CPU TIM... disconnect fan and run system in the bios screen monitoring the temperature for a few minutes and see if the heatsink gets hot as the CPU temps go up. if not, the TIM is toast and not pulling heat out of the CPU...replace thermal CPU paste. scrape that yellow crap off and replace it with some good stuff.

--- End quote ---

Put new thermal paste and it's running like a champ.

Navigation

[0] Message Index

[*] Previous page

Go to full version