Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Rowe Ami R90 series error code 37  (Read 2331 times)

0 Members and 1 Guest are viewing this topic.

ljs12377

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:August 30, 2021, 12:59:17 pm
  • I want to build my own arcade controls!
Rowe Ami R90 series error code 37
« on: March 10, 2018, 10:22:53 am »
Hi All, could anybody help me with a problem that I am having with my R90 series carousel. There is error code 37 showing. I have replaced the inner cam switch as suggested and tried clearing the error codes using 666 then 699 but it is still showing. Is there anything else that I need to Do? Thanks in advance

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1085
  • Last login:July 19, 2020, 01:22:45 pm
Re: Rowe Ami R90 series error code 37
« Reply #1 on: March 26, 2018, 08:15:08 am »
Check that the spade connections to the cam switches are not touching any other spade (being uninsulated) it is easy to push these together when lifting the mechanism out of the jukebox. If these are not touching and you have adjusted the replaced switch correctly, cleared the codes then there may be a fault on the mechanism control.

Regards
Alan

Alan Hood
ami-man
UK