| Main > Consoles |
| universal controller |
| (1/2) > >> |
| psilocybster:
hello all, i am looking for a little help, this is what iam trying to accomplish: set of controlls (happ joystick and button )i am trying to combine snes, nes,sega, psx controllers into one arcade cabinet using only 5 happ buttons ive combined the A from nes the A from snes the A from sega and the X from psx and so on running these to the happ pushbuttons , is this possible? it works fine as long as i only have 1 controller hacked in if i add another i start getting weird actions. i might have a wire or 2 shorted though any suggestions? also i looked at the psx controller adapters at lik sang. is it possible to split 1 psx controller into three and the run each through a 1snes adapter 2 nes adapter 3 sega adapter and have these constantly attached so all i would have to do is power down a console an power up the next to switch games? thanks for any help! |
| Dave_K.:
Sorry dude, it aint that easy....so "no" to both your questions. Hack each console seperately and use a common connector to the control panel (like molex of db25). |
| psilocybster:
thanks for the reply, I dont give up easy though! about this molex plug, do they make a splitter for these? 1 input 3-4 output.. also i need a 16 pin plug that would belike this: _______ ____16 pin |\ | 4 pos | /_____16 pin 16pin| -----|switch |--------------16 pin |/ |______| \_____16 pin |
| jakejake28:
i've gotta agree with the molex connecters. then its just: SNES CTRLR ----->Molex NES CTRLR ------>Molex Molex -----> PS CTRLR SEGA CTRLR ----->Molex |
| psilocybster:
can you give a little more info on exactly how your using this molex connector? ??? |
| Navigation |
| Message Index |
| Next page |