Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: How should i fasten down my CP?  (Read 1484 times)

0 Members and 1 Guest are viewing this topic.

equlizer

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 363
  • Last login:November 17, 2019, 02:56:48 am
  • All your base are belong to us
How should i fasten down my CP?
« on: February 02, 2018, 11:26:56 pm »
I really dont want to go from the top as you would see screws unless there is another way to do it or i can screw it down from the sides.  I also thought about going from the sides using 1/8 pressure pins that i would just squeeze in at the bottom flush to the cp so i could swing it open then use 2 more pins on the top sides and put a ring on the pins so i could pull them out easily.
Any ideas would be appreciated :)
Or i could put some L brackets underneath which would make it so i dont need any screws on top or the side

http://i1207.photobucket.com/albums/bb472/equlizer36/2018-02-02%2021.09.59_zpsg0mlmq6i.jpg
http://i1207.photobucket.com/albums/bb472/equlizer36/2018-02-02%2021.10.19_zpsad4lqzz9.jpg
http://i1207.photobucket.com/albums/bb472/equlizer36/2018-02-02%2021.03.21_zpskkaeety4.jpg
« Last Edit: February 02, 2018, 11:50:21 pm by equlizer »

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4412
  • Last login:Yesterday at 10:40:50 pm
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: How should i fasten down my CP?
« Reply #1 on: February 03, 2018, 01:29:13 pm »
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

equlizer

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 363
  • Last login:November 17, 2019, 02:56:48 am
  • All your base are belong to us
Re: How should i fasten down my CP?
« Reply #2 on: February 04, 2018, 04:14:25 am »
« Last Edit: February 04, 2018, 04:21:20 am by equlizer »

GeoMan

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:March 23, 2024, 09:40:09 am
Re: How should i fasten down my CP?
« Reply #3 on: February 04, 2018, 08:26:16 am »
Magnets?