Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Help with Optiwiz or UHID with a Chase HQ Wheel  (Read 593 times)

0 Members and 1 Guest are viewing this topic.

asantora

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 60
  • I want to build my own arcade controls!
Help with Optiwiz or UHID with a Chase HQ Wheel
« on: January 31, 2018, 09:06:07 pm »
Picked up an optical wheel from a chase HQ. Would like to use it with a PC setup, but not sure if I should use an optiwiz or UHID. For those of you with experience, any help would be appreciated. Some questions that I have, with either setup:

Are additional buttons such as a shifter or pedal available as additional inputs on the optiwiz PCB?

Does anyone know this optical sensor is (pic below) and if it will work with Optiwiz or UHID?

I assume red is +5vdc and black is ground, does that sound right?

Thank you,




Sent from my iPhone using Tapatalk

2huwman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 46
  • I want to build my own arcade controls!
Re: Help with Optiwiz or UHID with a Chase HQ Wheel
« Reply #1 on: February 05, 2018, 04:29:34 pm »
I'm afraid I can't help you too much with your specific questions, but I did use an optipac with a chase HQ cabinet and it worked well.

https://www.ultimarc.com/optipac1.html

Here's the little write up i did:

http://www.jammaplus.co.uk/forum/forum_posts.asp?TID=65327&title=chase-hq-as-mame-driving-cab

asantora

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 60
  • I want to build my own arcade controls!
Re: Help with Optiwiz or UHID with a Chase HQ Wheel
« Reply #2 on: February 12, 2018, 07:21:00 am »
Thanks, will check it out. Also spoke to Andy and he confirmed that I could use the UHID. Will do a write up when finished


Sent from my iPhone using Tapatalk

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31