| Main > Project Announcements |
| New Cabinet Build: Lakeside Arcade - plenty of pics. |
| << < (41/44) > >> |
| cgregory22:
HI, I am going to build basically this exact cabinet. Was wondering if you are willing to send over the plans to me? Really appreciate it! Christian |
| PL1:
--- Quote from: cgregory22 on September 24, 2020, 11:38:52 am ---HI, I am going to build basically this exact cabinet. Was wondering if you are willing to send over the plans to me? Really appreciate it! Christian --- End quote --- --- Quote from: bperkins01 on July 25, 2020, 03:53:37 pm ---Maybe you missed it.. I made 26 pages of plans here: https://bperkins.files.wordpress.com/2019/03/arcade-machine.pdf If if that doesn't cover it.. I don't know what will.... --- End quote --- Scott |
| cgregory22:
Awesome, Thank You! I'm about 1/3 of the way through the project, but didn't make the dado cuts for the bezel.Any suggestions? |
| bperkins01:
They are not required. Most bezels have 3/4" blocking behind them. You should be able to do that and make the glass a little narrower. If you didn't do them on the shelf or the speaker box - then you can also do the same - but you may have to add some edging to the face that you can tack down to hold it in place. I used dados only because the lines were nice and clean.. |
| rackoon:
super clean. this is real close to the cabs I build at school, I might just use your drawings and stop cutting the sides myself. Its my least favorit part of making a cab. Its the only part i dont let the students do and I know a locsl shop that will do it cheap. I always knock 14 inches off the bottom so they ca sit and play because bar stool just get in the way and I have 30 standard chairs already Geat job :applaud: |
| Navigation |
| Message Index |
| Next page |
| Previous page |