Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: How do I make servostik work when windows has been "shelled"  (Read 1230 times)

0 Members and 2 Guests are viewing this topic.

Afterburner1970

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 24
  • Last login:June 28, 2022, 12:22:14 am
  • I want to build my own arcade controls!
How do I make servostik work when windows has been "shelled"
« on: January 24, 2018, 03:45:44 pm »
Hi,

So I can get it to work when I "un-shell" windows. works perfectly, switching between 4 and 8 way as each game isn selected. But not when shelled.

The reason I shelled it, was to 100% remove all aspects of windows on startup.....other wise I get a half second of the task bar showing up?

Any one else solved this.....oh, and Im running Windows XP

thoughts?

Thanks in advance


barrymossel

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 498
  • Last login:October 29, 2021, 11:25:52 am
  • Spectrum
    • forum.arcadecontrols.com/index.php/topic,157647.0.html
Re: How do I make servostik work when windows has been "shelled"
« Reply #1 on: January 25, 2018, 05:20:38 am »
I don't have experience with the Servo-Stik and Windows, but what software are you using? I guess that's pretty critical to answer your question. So: frontend, way to switch the stick, etc..