Anybody have the settings in MAME for using the spinner for Puzz Loop? I have it set to use spinner but it still works funny. Like spin one way so far then it stops and you have to spin knob in other direction to continue. I know it's been a while since anybody posted in here for this but figured I'd give it a shot. Thanks
Sounds like you haven't changed joystick to spinner.
1. In MAME dipswitch menu (TAB) set Service Mode to On.
2. Exit MAME menu. (TAB)
3. Press F3 to reboot the game. It will end up in the Test Mode Menu.
4. In the game's Test Mode Menu, select Game Configuration and press "1P Button A". (Player 1 Button 1)
5. Change Input Control from "Joystick" to "Knob Controller"
6. Highlight "Data Save", press "1P Button A". (Player 1 Button 1), and confirm.
7. Highlight "Exit" and press "1P Button A". (Player 1 Button 1)
8. In MAME dipswitch menu (TAB) set Service Mode to Off.
9. Exit MAME menu. (TAB)
10. Press P1 and P2 Start buttons to exit the Test Mode Menu.
Scott
EDIT: Just confirmed that the behavior you describe is what happens when you use a spinner in joystick mode.