Main > Main Forum

Big Buck Hunter Pro (open season, world, safari, etc.) replacement boards

<< < (2/3) > >>

bjordan314:

--- Quote from: lilshawn on January 11, 2018, 09:40:26 pm ---any of them. they are all virtually identical having the same/similar northbridges and audio systems. this is why they work.

M2N-MX SE+
M2N86-AM-SE2
M68S+
M2N68-AM
M2N68-AM+
K9N6PGM2-V2

the one you have there is the green 6100 series board made by biostar. any of those models will replace it. I recommend either sourcing a board with a CPU/memory already included or purchase new ones for your new board. depending on the board you get...the replacement board may or may not be able to reuse your CPU or memory from your old board.

--- End quote ---
Ok I will get back to u when I get the new board


Sent from my iPhone using Tapatalk

bjordan314:
it stay on this screen now


Sent from my iPhone using Tapatalk

shredso:
I can confirm the M2N-MX SE works.  I changed the motherboard, RAM, CPU and SSD all at once, so I'm not sure what had the biggest impact.  The game boots and loads so much faster now. 

bjordan314 Try reinstalling the game using the restore discs. 

gregdole7:
I have just replace a BBHPro motherboard with the M2N-MX SE+.

System boots to the loading "please wait" BBH splash screen, then goes black.

I reinstalled from recovery DVD, and have same issue. Recovery DVD is v. 1.0.5.

If I am understanding what I am reading above, this MB has issues with BBHPro. To remedy, I need to find another computer, remove the HDD from that computer, insert BBHPro HHDD and boot from DVD and run the recovery software. Is that correct?

lilshawn:
Most likely. The OS used to boot the install disk does not like something in the BIOS and causes it to hang. If the OS was updated it would work, but someone more knowledgeable in Linux would have to take a stab at it

Navigation

[0] Message Index

[#] Next page

[*] Previous page