Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: 3D Printing : Arcade Edition Thread  (Read 73231 times)

0 Members and 1 Guest are viewing this topic.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
3D Printing : Arcade Edition Thread
« on: November 23, 2017, 09:04:32 pm »
Use this thread to post Arcade-related 3D printed projects, .stl files, and more. Let’s keep the other thread for support questions. This one is strictly for arcade stuff.
***Build what you dig, bro. Build what you dig.***

05SRT4

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1092
  • Last login:Yesterday at 04:31:35 pm
  • Check out my Pow Pow
Re: 3D Printing : Arcade Edition Thread
« Reply #1 on: November 23, 2017, 10:16:55 pm »
Subbing, thanks

I am excited to see what everyone comes up with.

fablog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 339
  • Last login:February 18, 2024, 10:30:06 pm
Re: 3D Printing : Arcade Edition Thread
« Reply #2 on: November 23, 2017, 11:07:43 pm »
Namco guncon (not mine)



https://sketchfab.com/models/fb47fae605f64e8f95a49a0ee7a9dcc7

If anyone is interested to finish it to be used with the Aimtrak electronic kit...
« Last Edit: November 24, 2017, 08:00:17 am by fablog »

rovingmind

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 632
  • Last login:October 17, 2023, 11:13:48 pm
  • If you only knew the POWER of the Dark Side
    • rovingmind
Re: 3D Printing : Arcade Edition Thread
« Reply #3 on: November 24, 2017, 04:20:21 am »
i have no pictures of it, but i did print some replacement arcade button nuts from a thingiverse download.
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHHHH!!!!!

Locke141

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1690
  • Last login:February 03, 2024, 06:00:00 am
  • Never grow up.
Re: 3D Printing : Arcade Edition Thread
« Reply #4 on: November 24, 2017, 10:09:21 am »
Should we post other CNC stuff? I have a bunch of laser files I made for builds.

BadMouth

  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9226
  • Last login:March 17, 2024, 08:21:52 pm
  • ...
Re: 3D Printing : Arcade Edition Thread
« Reply #5 on: November 24, 2017, 11:02:02 am »
Not really arcade, but here's the easy Gameboy style controller sleeve I made for my phone (Blu Life One X2).
The back would need to be resized to fit other phones.  If I did it over again, I'd make the bottom flat so it could stand on it's end.
Links to tinkercad files are in this post:http://forum.arcadecontrols.com/index.php/topic,152133.msg1596901.html#msg1596901
Instructions are on the following posts.





yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #6 on: November 24, 2017, 11:30:35 am »
Anything video game related is cool here.
***Build what you dig, bro. Build what you dig.***

jdbailey1206

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2656
  • Last login:March 11, 2023, 01:32:56 pm
  • No. It's your top score on Pole Position.
Re: 3D Printing : Arcade Edition Thread
« Reply #7 on: November 24, 2017, 07:23:00 pm »
I printed a nut shaver with my 3D printer but I cant seem to find the file at the moment...

nitrogen_widget

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1746
  • Last login:March 06, 2024, 07:26:06 am
  • I want to build my own arcade controls!
Re: 3D Printing : Arcade Edition Thread
« Reply #8 on: November 24, 2017, 07:47:01 pm »
I printed a nut shaver with my 3D printer but I cant seem to find the file at the moment...

if it's the one with the serrated blade do everyone a favor and not post it.

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4222
  • Last login:December 17, 2023, 08:05:48 am
  • I have a gaming addiction.....
Re: 3D Printing : Arcade Edition Thread
« Reply #9 on: November 25, 2017, 07:55:20 am »
I printed a nut shaver with my 3D printer but I cant seem to find the file at the moment...

Gillete or Braun?

Seriously wtf is a nut shaver??

thomas_surles

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2115
  • Last login:June 19, 2023, 07:20:00 pm
Re: 3D Printing : Arcade Edition Thread
« Reply #10 on: November 25, 2017, 10:12:48 am »
I printed a nut shaver with my 3D printer but I cant seem to find the file at the moment...
Hook a brother up. I dont own a razer so i steal my wifes for my bag and ass, then put it back and dont tell her.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #11 on: November 25, 2017, 11:03:59 am »
Go fog up the Chuff thread with your nutsack tales. This is for 3D printing.
***Build what you dig, bro. Build what you dig.***

jdbailey1206

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2656
  • Last login:March 11, 2023, 01:32:56 pm
  • No. It's your top score on Pole Position.
Re: 3D Printing : Arcade Edition Thread
« Reply #12 on: November 25, 2017, 11:41:07 am »
I printed a nut shaver with my 3D printer but I cant seem to find the file at the moment...

if it's the one with the serrated blade do everyone a favor and not post it.

My nuts or the razor?

C'mon Yots.  The day one thread stays on track Im taking my cleanly shaven joystick and leaving.
« Last Edit: November 25, 2017, 11:45:35 am by jdbailey1206 »

Nephasth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1376
  • Last login:March 11, 2024, 11:02:52 pm
  • Bitches love Centipede
Re: 3D Printing : Arcade Edition Thread
« Reply #13 on: November 25, 2017, 11:56:19 am »
Edge connector keys
Molex/other electrical connectors
Molex pin removal tool
Button hole plugs
Marquee retainers
Monitor neck bubbles (like on Gorf)
Gorf/Tron/SH joystick handles
Custom joystick restrictor plates
Various joystick shaft spacer sleeves
Anycoin mechs
"Next" quarter trays
C-clips
Wire harness clips
Vent grilles
Speaker grilles

Lots of things to print...
%Bartop

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
3D Printing : Arcade Edition Thread
« Reply #14 on: November 25, 2017, 04:17:11 pm »
« Last Edit: November 26, 2017, 10:36:42 am by yotsuya »
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #15 on: November 25, 2017, 04:18:45 pm »
Metal control panel button hole fillers

https://www.thingiverse.com/thing:2010405
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #16 on: November 25, 2017, 04:19:17 pm »
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #17 on: November 25, 2017, 04:19:54 pm »
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #18 on: November 25, 2017, 04:20:33 pm »
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #19 on: November 25, 2017, 04:21:18 pm »
***Build what you dig, bro. Build what you dig.***

smass

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 302
  • Last login:January 09, 2024, 07:46:54 pm
  • Cheapskate Arcade
Re: 3D Printing : Arcade Edition Thread
« Reply #20 on: November 25, 2017, 07:28:27 pm »
Metal control panel button hole fillers

https://www.thingiverse.com/thing:2010405

I need these.  Button hole plugs that I have found in the usual places all seem to be the raised plugs.  These sit flush, which is dope.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #21 on: November 25, 2017, 08:57:44 pm »
Metal control panel button hole fillers

https://www.thingiverse.com/thing:2010405

I need these.  Button hole plugs that I have found in the usual places all seem to be the raised plugs.  These sit flush, which is dope.
Same here. Great for fixing Swiss cheese
***Build what you dig, bro. Build what you dig.***

jdbailey1206

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2656
  • Last login:March 11, 2023, 01:32:56 pm
  • No. It's your top score on Pole Position.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #23 on: November 26, 2017, 10:36:07 am »
Organizer for JDBailey

https://www.thingiverse.com/thing:1255964

Worlds smallest violin for Yots.
https://www.thingiverse.com/thing:2127732

Your ballsack needs attention, dude. Go tend to it while the creative types play.
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #24 on: November 26, 2017, 12:55:44 pm »
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #25 on: November 26, 2017, 12:59:18 pm »
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #26 on: November 26, 2017, 01:00:39 pm »
Octagonal Restrictor Plate

 https://www.thingiverse.com/thing:52225
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #27 on: November 26, 2017, 01:01:58 pm »
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #28 on: November 26, 2017, 01:02:51 pm »
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #29 on: November 26, 2017, 01:06:56 pm »
Sanwa 8-way restrictor plate

https://www.thingiverse.com/thing:1664744
***Build what you dig, bro. Build what you dig.***

Locke141

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1690
  • Last login:February 03, 2024, 06:00:00 am
  • Never grow up.
Re: 3D Printing : Arcade Edition Thread
« Reply #30 on: November 26, 2017, 08:51:54 pm »
3D printable trays for Rhea and Phoebe:
– new design: http://www.thingiverse.com/thing:2010525
– old design: http://www.thingiverse.com/thing:1546926
3D printable tray for GDEMU (incl. the early v5 design): http://www.thingiverse.com/thing:1585333
These can be bought here: https://bit-district.com

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
3D Printing : Arcade Edition Thread
« Reply #31 on: November 26, 2017, 08:58:02 pm »
3D printable trays for Rhea and Phoebe:
– new design: http://www.thingiverse.com/thing:2010525
– old design: http://www.thingiverse.com/thing:1546926
3D printable tray for GDEMU (incl. the early v5 design): http://www.thingiverse.com/thing:1585333
These can be bought here: https://bit-district.com

These are the handy things that it helps to point out. Thanks for sharing!
***Build what you dig, bro. Build what you dig.***

Locke141

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1690
  • Last login:February 03, 2024, 06:00:00 am
  • Never grow up.
Re: 3D Printing : Arcade Edition Thread
« Reply #32 on: November 26, 2017, 09:12:41 pm »
This is a fun thread.

I end up with access to a 3D printer again I'll start posting my own designs.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
3D Printing : Arcade Edition Thread
« Reply #33 on: November 26, 2017, 09:26:22 pm »
This is a fun thread.

I end up with access to a 3D printer again I'll start posting my own designs.

Yeah, I want to post the Galaga spacers I made. Nothing too complex, but it’s definitely a time saver.
***Build what you dig, bro. Build what you dig.***

Locke141

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1690
  • Last login:February 03, 2024, 06:00:00 am
  • Never grow up.
Re: 3D Printing : Arcade Edition Thread
« Reply #34 on: November 26, 2017, 09:33:13 pm »
What you using design? I have an idea or two kicking around I could knock up.

And, I build one of these Illuminated Arcade Spinner, it was a cool project.

http://forum.arcadecontrols.com/index.php/topic,152868.0.html

https://www.thingiverse.com/thing:2021152
« Last Edit: November 27, 2017, 11:13:48 am by Locke141 »

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: 3D Printing : Arcade Edition Thread
« Reply #35 on: November 26, 2017, 09:50:59 pm »
I’m just playing around in Tinkercad right now. I’ll keep playing with it, then probably move on the Fusion360.
***Build what you dig, bro. Build what you dig.***

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5880
  • Last login:Today at 06:29:49 am
  • This plan is foolproof
Re: 3D Printing : Arcade Edition Thread
« Reply #36 on: November 27, 2017, 06:56:36 am »
This thread is just what I was thinking of Yots.

I am going to have my son print up a bunch of those PCB stand offs. He has access to 3D printers at school.


Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5880
  • Last login:Today at 06:29:49 am
  • This plan is foolproof
Re: 3D Printing : Arcade Edition Thread
« Reply #38 on: November 27, 2017, 10:43:06 am »
I like that ATX power supply mount. That will come in handy.

thomas_surles

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2115
  • Last login:June 19, 2023, 07:20:00 pm
Re: 3D Printing : Arcade Edition Thread
« Reply #39 on: November 27, 2017, 10:50:17 am »
I like that ATX power supply mount. That will come in handy.
I thought so too