I watched this video on YouTube when trying to get my Pi set up.
And I picked up three of these Micro SD cards to use for various Pi images.
https://www.bestbuy.ca/en-ca/product/seagate-32gb-80mb-s-microsdhc-memory-card/11467209.aspx?I've written the image that's currently giving me issues to an SD card prior. It's the very image that I'm currently using in my Sega Genesis (USB hub) Pi. Everything worked perfectly !
So I wanted to write the image to an SD card for a co-worker. I've formatted the Segate card using SD formatter, and used Windows Disk Imager to write the image. I get no errors, and it actually tells me that the write was completed successfully. However when the write is complete the SD card shows nothing is on it! It's empty. The image is apx 32GB and the card has sufficient space to host the image. I recall prior when the image was written the card would show a smaller size which I believe is due to it being formatted for Linux. I've tired a 2nd SD card (same Segate model) and get the same result. Image is written, shows successful, however card is blank! I put the card into the Pi in the event that it was just reading wrong on my PC, but nothing.
I'm at a loss to why this is happening. Sadly I've deleted the compressed file of the image I once had.
Any advise would be appreciated.
Thank you all