Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: J-Pac and RetroPie - Compatable?  (Read 239 times)

0 Members and 1 Guest are viewing this topic.

snakerake

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • I want to build my own arcade controls!
J-Pac and RetroPie - Compatable?
« on: November 08, 2017, 11:48:39 am »
Hey All,

I just picked up a Jamma Arcade cabinet that I'd like to put my Pi in.  I was thinking about getting a J-Pac from Ultimarc to hook it up (with a HDMI to VGA adaptor). Has anyone here used a J-Pac with their Pi?  Are they compatible?
« Last Edit: November 08, 2017, 09:47:46 pm by snakerake »

Spawn2k

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 37
  • I want to build my own arcade controls!
Re: J-Pac and RetroPie - Compatable?
« Reply #1 on: November 09, 2017, 01:20:56 am »
Its compatible. controls work. audio works but you will prob need an amp. but haven't tested it with an arcade crt. There is a vga to cga on the jpac but you need to configure the pi to output standard res. Since i swapped out the crt for lcd I didn't to any further research but youtube has some videos.

1500points

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 379
    • How to succeed at Robotron
Re: J-Pac and RetroPie - Compatable?
« Reply #2 on: November 09, 2017, 08:54:13 am »
Is there a specific reason you want the jamma standard connector the J-pac provides?  Is your setup wired with a jamma harness, or will you be playing jamma pcbs in the machine?

If not you would be fine with the less expensive i-pac.

snakerake

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • I want to build my own arcade controls!
Re: J-Pac and RetroPie - Compatable?
« Reply #3 on: November 09, 2017, 09:12:32 pm »
The cabinet is already wired for Jamma boards. I'm eventually gonna restore it to dedicated cabinet but I'd like to see how the pi does in it in the mean time. So jpac seems like it would be quicket to swap out.

1500points

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 379
    • How to succeed at Robotron
Re: J-Pac and RetroPie - Compatable?
« Reply #4 on: November 09, 2017, 10:45:45 pm »
Sounds like the jpac is a wise choice for your scenario


Sent from my iPhone using Tapatalk

snakerake

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • I want to build my own arcade controls!
Re: J-Pac and RetroPie - Compatable?
« Reply #5 on: November 10, 2017, 09:32:47 am »
I ordered the J-Pac, will report back with how it goes, I didn;t realize Ultimarc was in the UK though - I guess I'll be waiting a little longer to find out.  I bought an VGA to 15kHz CGA bowrd with additional VGA output awhile back so hopefully it can downscale the video if the jpac doesn't.  I've read up on changing the Pi's output to 240p so hopefully it will work.

scoltx

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • I want to build my own arcade controls!
Re: J-Pac and RetroPie - Compatable?
« Reply #6 on: November 12, 2017, 09:03:47 am »
I ordered the J-Pac, will report back with how it goes, I didn;t realize Ultimarc was in the UK though - I guess I'll be waiting a little longer to find out.  I bought an VGA to 15kHz CGA bowrd with additional VGA output awhile back so hopefully it can downscale the video if the jpac doesn't.  I've read up on changing the Pi's output to 240p so hopefully it will work.

Have a look at the GertVGA666 kit. For native vga out for the Pi.
https://www.pi-supply.com/product/gert-vga-666-hardware-vga-raspberry-pi/

Because the design is open source you can find them prebuilt on ebay for not a lot money more.  I plan to use this with a PI in one of my Jamma cabs.  Also the jpac has a frequency divider for 31 -> 15kHz out for PC menus etc that can't easily be forced to native arcade res. 

For an audio amp I ordered one of these for Aliexpress
https://www.aliexpress.com/item/Arcade-2-0-Stereo-Audio-Amplifier-Board-Dual-Channel-AUX-Amplifier-Board-Module-DC-1-8/32792986879.html?spm=a2g0s.9042311.0.0.BqFas8

Haven't tested the pi/gert/amp/jpac combo yet but in theory all should be good.

I have tweaked a pi2 for A/V port 240p into a crt tv with a trrs composite cable and I must say classic console games look pretty darn good with that combo.

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31