Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Monitor Help No Picture  (Read 1223 times)

0 Members and 1 Guest are viewing this topic.

wisker27

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:October 26, 2017, 08:20:47 am
  • I want to build my own arcade controls!
Monitor Help No Picture
« on: October 25, 2017, 09:42:17 pm »
Hello,
I have a goldentee 2005 that i am trying to get the monitor working, i know the game works as i can hook a regular monitor to it and it shows pic.

I have no picture at all on the monitor that is in it, i did not have any discharge from the cap even after being plugged in for a bit.
The monitor is a neotec nt-500, i assumed the flyback was bad and purchased a new one, the new replacement has a extra white wire that my old one didnt? Could i get clearification on which wire goes to the neck and what would the other be for? or did i get the wrong flyback.

I am still not getting any discharge from the cap and no neck glow, fuse tested good so what would my next step be to figure out why im not getting and discharge is the flyback not working? I attached original and the new one installed.

Thanks

wisker27

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:October 26, 2017, 08:20:47 am
  • I want to build my own arcade controls!
Re: Monitor Help No Picture
« Reply #1 on: October 25, 2017, 10:48:11 pm »
On the primary side im getting 121v and on the secondary side im getting 121volt but on the board it says different voltages is that right?