Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Model 3 emulator with crt emudriver issues  (Read 294 times)

0 Members and 1 Guest are viewing this topic.

alex2005

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • I want to build my own arcade controls!
Model 3 emulator with crt emudriver issues
« on: September 19, 2017, 10:32:55 am »
Hi,
I've  been looking on the emulators compatibility with crt emudriver and I can't find anything related to the sega model 3 emulator, for which I am having issues.
I set up crt emudriver for super resolutions, and I cant get figure out how to set up the M3 emulator.
Basically whatever resolution I use on my 15khz monitor will result in a flickering screen.
I had this issue before with the arcadevga and could sort it out by using a 640x288 resolution, but at this moment with crt emudriver it doesnt resolve it.

Has anyone been through this before? What resolutions do you use to set up the M3 emulator?

Thanks in advance!

PS. I just realize i have about 15-20 resolutions on my monitor properties, including those at 2560x... not sure if I should add some more or select a different file in vmmaker? (monitor is a Nanao ms2930, but it does not have automatic resolution switching, so i prefer to stick to 15khz resolutions only)
« Last Edit: September 19, 2017, 11:05:31 am by alex2005 »

donluca

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 100
  • I want to build my own arcade controls!
Re: Model 3 emulator with crt emudriver issues
« Reply #1 on: September 19, 2017, 04:30:12 pm »
Model 3 uses Medium Res, so it's 24Khz, that's why you're getting a flickering screen.

alex2005

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • I want to build my own arcade controls!
Re: Model 3 emulator with crt emudriver issues
« Reply #2 on: September 20, 2017, 01:52:52 pm »
I never had this problem before with the arcadevga, i recall to set that up to a bit lower than 640x480, and it worked like a charm.
Thats strange :(

alex2005

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • I want to build my own arcade controls!
Re: Model 3 emulator with crt emudriver issues
« Reply #3 on: September 22, 2017, 04:38:47 am »
I installed VMM again and chose a Generic 15.7 khz rather than Arcade 15.7 khz , this seemed to fix the issue :)

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31