I've been trying but can't seem to get an Attract-mode launched non-MAME emulator to display anything but the "default" lighting scheme when launched.
here is what I have in my rgbcmdd.xml file for the Model3 emulator Supermodel.
<emulator binary="supermodel" arcade="0" name="Sega Model 3" active="White" inactive="Off" retropie="0">
<rom id="default" way="8">
<control name="P1_START" colour="White"/>
<control name="P1_COIN" colour="White"/>
</rom>
<rom id="fvipers2" way="8">
<control name="P1_COIN" colour="White"/>
<control name="P1_START" colour="White"/>
<control name="P1_BUTTON1" colour="White"/>
<control name="P1_BUTTON2" colour="White"/>
<control name="P1_BUTTON3" colour="White"/>
<control name="P1_JOYSTICK" colour="White"/>
<control name="P2_COIN" colour="White"/>
<control name="P2_START" colour="White"/>
<control name="P2_BUTTON1" colour="White"/>
<control name="P2_BUTTON2" colour="White"/>
<control name="P2_BUTTON3" colour="White"/>
<control name="P2_JOYSTICK" colour="White"/>
</rom>
it is launched by Attractmode like this:
/arcade/model3/supermodel /arcade/model3/Roms/fvipers2.zip -fullscreen -crosshairs=1 -res=800,600 -new3d
from the Attractmode emulator config file configured like this:
executable /arcade/model3/supermodel
args [rompath][name][romext] -fullscreen -crosshairs=1 -res=800,600 -new3d
rompath /arcade/model3/Roms/
romext .zip
I have also tried it this way in case RGBC was looking at the last argument for the rom name:
/arcade/model3/supermodel -fullscreen -crosshairs=1 -res=800,600 -new3d /arcade/model3/Roms/fvipers2.zip
Daphne behaves the same way, it will use the default rom lighting scheme, but never the scheme from the rom launched.
I just figured that was because the method for launching Daphne was a billion times more crazy and RGBC couldn't figure it out.
executable /arcade/daphne/daphne.bin
args singe vldp -fastboot -fullscreen_window -x 320 -y 240 -noissues -scanlines -min_seek_delay 100 -seek_frames_per_ms 20 -nolog -noserversend -opengl -homedir /home/user/.daphne -framefile /home/user/.daphne/vldp_dl/[name]/[name]_framefile.txt -script /home/user/.daphne/vldp_dl/[name]/cdrom-[name].singe
rompath /home/user/.daphne/roms/
romext .zip
Could you explain how to configure a non-Retropie method for configuring emulators other than MAME? (which works perfectly the way
)
Thanks again for all the help already.