Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: emu4crt Mednafen fork - updated to 0.9.48  (Read 1252 times)

0 Members and 1 Guest are viewing this topic.

silmalik

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 27
  • I want to build my own arcade controls!
Re: emu4crt Mednafen fork - updated to 0.9.48
« Reply #40 on: November 11, 2017, 01:12:42 pm »
Yes, here it is  :cheers:

Ok, it seems that emu4crt is doing his job: switching to 256x288.

So, your problem should be related to your PAL modelines. You can check them, one by one, with Arcade_OSD.  ;)

alex2005

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • I want to build my own arcade controls!
Re: emu4crt Mednafen fork - updated to 0.9.48
« Reply #41 on: November 11, 2017, 03:01:49 pm »
Yes, here it is  :cheers:

Ok, it seems that emu4crt is doing his job: switching to 256x288.

So, your problem should be related to your PAL modelines. You can check them, one by one, with Arcade_OSD.  ;)

Thanks for the hints! I will check them, first i need to look how to use arcade_osd because i never used it before :)

In the meantime switched some of the roms to the respective ntsc version, and they seem to work fine. I did also some tests to convert pal to ntsc roms and this seems to work well so far :)

I will check the remaining roms that have no ntsc version and try to fix them with arcade_osd.

Again thanks and keep the good work!! Its awesome what you do with emu4crt :) :) :)

Dacasks

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 33
  • I want to build my own arcade controls!
Re: emu4crt Mednafen fork - updated to 0.9.48
« Reply #42 on: November 17, 2017, 11:29:06 am »

Well, I'm pretty sure that vsync will prevent any tearing. ;)

About input lag, emu4crt should not be worse than the official build, and, just in case, the Mednafen Team gives some recommendations: https://mednafen.github.io/documentation/#Section_lag

Blit time Sync was activated, that was causing more input lag, sorry. Now it's fine like the vanilla build, but what I meant about no screen tearing is the same solution as Groovymame: No tearing without needing the "regular vsync" which introduces lag.

I guess that isn't possible for now. But it's great already... just need to ignore the tearing.

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31