Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: PS3 SCART -> VGA Adapter - > RGB  (Read 218 times)

0 Members and 1 Guest are viewing this topic.

bimm25e

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 203
  • I want to build my own arcade controls!
PS3 SCART -> VGA Adapter - > RGB
« on: August 24, 2017, 04:29:18 pm »
so anyone know of an adapter with a female scart input that has a VGA(DE-15) on the other side?
I want to use a ps3 scart cable to get RGB signal then send it through a jpac's vga port and I'm hoping to avoid sending an analog signal though an ebay SCART coupler if possible.


thanks!

mourix

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 136
Re: PS3 SCART -> VGA Adapter - > RGB
« Reply #1 on: August 25, 2017, 02:32:44 pm »
If that adapter existed, it would confuse a lot of people because it won't work on a vga monitor..

It's not too hard to solder one up, though!

voltz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
Re: PS3 SCART -> VGA Adapter - > RGB
« Reply #2 on: August 26, 2017, 12:13:23 am »
I'm surprised you don't go the hdmi to vga route.

Btw, what is the resolution output you're planning to use? 
« Last Edit: August 26, 2017, 12:20:21 am by voltz »
Moff's the Stuff!

bimm25e

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 203
  • I want to build my own arcade controls!
Re: PS3 SCART -> VGA Adapter - > RGB
« Reply #3 on: September 01, 2017, 04:24:31 pm »
I'm surprised you don't go the hdmi to vga route.

Btw, what is the resolution output you're planning to use?

Well I have a cabinet, with a 15 kHz monitor in it

I use a J-PAC  to pass a computer with CRTEmudriver through VGA to the 15khz monitor.

I want to wire in a KVM that switches audio and video going to the J-PAC between the PC and an empty Female SCART port that will take RGB from a console (modded if need be)  and shoot it to the screen through the J-PAC (video amp) and my audio amp which both go straight to the cab.



I have a female scart port but need to wire it up still, audio L/R is easy enough but what pins do I need to wire the RGB (don't care about component/composite/s-vid) video signal between the scart socket and the DB-15 (vga) pins going tinto the J-PAC?


  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31