| Software Support > Automated Projects |
| Modify smart power strip to turn on separate 110v circuit? |
| (1/2) > >> |
| BadMouth:
Anyone here tear apart and mess with a smart power strip? I'm looking at devices to automatically turn on the dust collector in my workshop. They are around $50. That's not bad, but I've got some extra smart power strips laying around and I wonder if those could accomplish the same thing without much hassle. The trick here is that the dust collector needs to be on a different circuit than the device triggering it. So, anyone ever tear one down and fiddle with it? |
| Mike A:
Don't plug your dust collector into a power strip. Double don't plug your dust collector into a power strip that you tinkered with. |
| Mike A:
Sorry. That wasn't very helpful. Your dust collector will either bog down or just trip the fuse on the smart strip. If it starts bogging down everything starts heating up. |
| pbj:
Do you just need an outlet timer, or is something else going to trigger the dust collector? It's pretty easy to modify a cheap power strip with a microrelay..... |
| BadMouth:
--- Quote from: pbj on August 15, 2017, 04:58:26 pm ---Do you just need an outlet timer, or is something else going to trigger the dust collector? It's pretty easy to modify a cheap power strip with a microrelay..... --- End quote --- I want the dust collector to turn on whenever a tool that is connected to it is turned on (table saw, band saw, jointer, etc) Available devices for this pupose run for 7 seconds after the tool is turned off, but my smart strips stay on for about that long too. Mike A, The dust collector is only on a 15 amp circuit and doesn't trip that. I'll see if the smart strip has any specs listed on the box. It's probably a fairly cheap one. I got two free from the electric company as a renter, then after buying the place and switching the service to my name they sent two more. |
| Navigation |
| Message Index |
| Next page |