Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Ms. Pacman Cocktail Monitor issues  (Read 359 times)

0 Members and 1 Guest are viewing this topic.

bjames901

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
Ms. Pacman Cocktail Monitor issues
« on: August 15, 2017, 11:48:43 am »
So I have a G07 Electrohome monitor and I am getting horizontal snow lines. I know there are pots that can adjust the vertical hold/horizontal hold, but I'm leery about adjusting them with the thing on. I tried using an insulated screwdriver to turn the pots, but that didn't fit correctly. I do have a allen wrench tool. I do have a folding hex key tool with different sized bits. I'm just not sure if that would be safe to use since it's just plastic and metal. Any suggestions would be appreciated or anything to watch out for when working on it.

behrmr

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 364
Re: Ms. Pacman Cocktail Monitor issues
« Reply #1 on: August 15, 2017, 02:04:15 pm »
Get yourself a set of TV adjustment tools.  Don't use a metal anything on those when on.  You will cause more problems.

These should work

https://www.arcadepartsandrepair.com/store/monitors/television-width-coil-alignment-and-adjustment-tool-set-6-piece-set/

And not sure what you mean by snow lines. Maybe post a picture.

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4594
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Ms. Pacman Cocktail Monitor issues
« Reply #2 on: August 17, 2017, 11:25:34 am »
Do yourself a favor and grab one of these:
https://www.ebay.com/p/2-Tuning-Tool-for-RC-Transmitters-INDUCTOR-Coils-Drones-Radios-GC-MPN-8606L/1208147184?_trksid=p2047675.c100012.m1985&_trkparms=ao%3D2%26asc%3D41375%26meid%3D6b6b132359b7427c81594c8086724c27%26pid%3D100012%26

This adjustment tool is made of nylon and is HUGE (11" long) and makes sticking anything into a live monitor super easy and safer for adjusting stuff.

DeL
Stop by my Youtube channel and leave a comment:

bjames901

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
Re: Ms. Pacman Cocktail Monitor issues
« Reply #3 on: October 24, 2017, 02:24:33 pm »
Picture of the monitor. Tried adjusting the V-hold. Did not get an image. I did put the original board back from the 60-1 conversion and that did work so not sure if it is an issue with the board or Jamma adapter.

bjames901

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
Re: Ms. Pacman Cocktail Monitor issues
« Reply #4 on: October 24, 2017, 02:31:26 pm »
monitor picture

DeLuSioNal29

  • Global Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 4594
  • Build the impossible -"There is no Spoon"
    • DeLuSioNaL's YouTube Videos
Re: Ms. Pacman Cocktail Monitor issues
« Reply #5 on: October 24, 2017, 06:45:55 pm »
Can we see a pic of the connectors from the monitor to the PCB?  Maybe you don't have the sync line hooked up correctly.

DeL
Stop by my Youtube channel and leave a comment:

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31