Best place to get golden tee swing decal?

[rackoon]

OK, I have a control panel on my cab that I have put a lot of money and time into and I need one last thing, golden tee trackball arrows and the  little example strip that describes swings.

I have a control panel printed by gameongraphixs and custom joystick surrounds that go on top of the control panel, custom button labels and modded joysticks. I got it all but these golden tee decals.

I could just choke on it and pay $55 bucks and cut up a new overlay, but man that seems like a lot of cash just to cut it up for a few parts.

Maybe Im a cheap ass and should just pay up but it seems wastfull.


Any ideas or recomendations?                         I am a math teacher not an English teacher so dont pick on my spelling  

[SlammedNiss]

OK, I have a control panel on my cab that I have put a lot of money and time into and I need one last thing, golden tee trackball arrows and the  little example strip that describes swings.

I have a control panel printed by gameongraphixs and custom joystick surrounds that go on top of the control panel, custom button labels and modded joysticks. I got it all but these golden tee decals.

I could just choke on it and pay $55 bucks and cut up a new overlay, but man that seems like a lot of cash just to cut it up for a few parts.

Maybe Im a cheap ass and should just pay up but it seems wastfull.


Any ideas or recomendations?                         I am a math teacher not an English teacher so dont pick on my spelling

I've never really played GT before. Can you give an example of what you're after?

Edit:
I assume

is the arrows you're referring to? But I'm not sure what the "example strip that describes swings" is.

[rackoon]

Yup, those are the arrows but the have 1.2.3. and a.b.c. labeled on them.

By the way SlammedNiss, I have your button labels and joystick surrounds installed and they look great. I highly recommend them.

I bet you could make the arrows but I still need the little chart that runs across the top of a golden tee cp that shows the angle in which to roll the trackball.

[SlammedNiss]

Yup, those are the arrows but the have 1.2.3. and a.b.c. labeled on them.

By the way SlammedNiss, I have your button labels and joystick surrounds installed and they look great. I highly recommend them.

I bet you could make the arrows but I still need the little chart that runs across the top of a golden tee cp that shows the angle in which to roll the trackball.

if you can give me an example, I'll see if it's something I can do. I did find THIS example for the CP. Is it the strip at the top you are wanting as well?

[Ian]

http://www.goldenteefan.com/wp-content/uploads/GTL_control_panel_showpiece_2016_3000pix.jpg

This is what he is after... the motion of the track ball gives you different spins on the ball.

[SlammedNiss]

Yup, those are the arrows but the have 1.2.3. and a.b.c. labeled on them.

By the way SlammedNiss, I have your button labels and joystick surrounds installed and they look great. I highly recommend them.

I bet you could make the arrows but I still need the little chart that runs across the top of a golden tee cp that shows the angle in which to roll the trackball.

rackoon, let me know what the measurements are the CP.

[rackoon]

Yea, what Ian posted is what I am looking at.

Everything can be in the same color (lime green is what everything else is) cp is black with lime green lighting on it)

I don"t care if everything is in transparent and green, it would probably look best that way

My cp is 33" but I was hoping for the swing sticker to be between 1" and 1.5" tall and 10" to 11.5"  wide.  But I do have some wiggle room.

[SlammedNiss]

Yea, what Ian posted is what I am looking at.

Everything can be in the same color (lime green is what everything else is) cp is black with lime green lighting on it)

I don"t care if everything is in transparent and green, it would probably look best that way

My cp is 33" but I was hoping for the swing sticker to be between 1" and 1.5" tall and 10" to 11.5"  wide.  But I do have some wiggle room.

I was just thinking of using the image that Ian posted and crop the trackball and the swings parts. Would that work? For the trackball, what is the diameter of the trackball and what should the overall diameter of the trackball decal be?

[Ian]

I wouldnt mind a copy of that if you wouldnt mind.
 

[SlammedNiss]

I wouldnt mind a copy of that if you wouldnt mind.
 

Of the trackball and the example swings? I'm attaching the cropped images below.

Edit: I've modified the decals a tad. Finished product would be as shown below. Sizing can be adjusted slightly if needed. If interested in purchasing, please see THIS THREAD for ordering details.

[Ian]

Anyone have the ability to make this into a sticker? Say  4" x 3"? message me i will pay for it.

[rackoon]

Nice work SlammedNiss, that is exactly what I am after.

As for size, the original would have a 3' trackball in the middle of those arrows. But to he honest, I don't see why it has to be that big if the arrows are going to get cut out anyway.

I think that if you made that whole image you posted somewhere around 5"x5" It would work great

[SlammedNiss]

Anyone have the ability to make this into a sticker? Say  4" x 3"? message me i will pay for it.

Nice work SlammedNiss, that is exactly what I am after.

As for size, the original would have a 3' trackball in the middle of those arrows. But to he honest, I don't see why it has to be that big if the arrows are going to get cut out anyway.

I think that if you made that whole image you posted somewhere around 5"x5" It would work great

I'm going to send you each a separate PM so we don't have to keep bumping this anymore.

[mike.rombough]

Hello there.  Might i be able to get a copy of this as well.  Its very nice

Sent from my SM-G930W8 using Tapatalk

[acvieluf]

If it possible for me to get a copy as well?  If you're not wanting to do it for free for a bunch of people, just say so.  I don't want to assume.

Thanks!

[rackoon]

Wow! turned out great

which I knew how to post pics

[SlammedNiss]

Wow! turned out great

which I knew how to post pics

you can post them to imgur.com w/out an acct, then just post the link.

[gauchomigo]

I recently received decals from @slammedniss for my pedestal arcade.  They are totally AWESOME.  Gives the entire control panel a professional look..

[SlammedNiss]

If interested in purchasing these decals, please see THIS THREAD for ordering info.