Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: GroovyMAME/ARCADE32  (Read 15307 times)

0 Members and 1 Guest are viewing this topic.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
GroovyMAME/ARCADE32
« on: July 19, 2017, 03:22:12 pm »
Here I will post my own GroovyMAME build based on official sources plus extra modifications imported from ARCADE http://arcade.mameworld.info (new derrative based on MAMEUIFX) and no nag patch. Some of those changes created by me.

Differences against standard GroovyMAME:

- no nag  - no loading screens or disclaimer info (use option 'skip_gameinfo 1' in mame.ini to activate this function)

Sound modifications:

- QS1000 volume boots (games using this chip has louder audio output)
- audio level fix for m72 driver
- frequency modification for several audio chips for proper audio speed (Aliens, Crime Fighters, Simpsons, Vendetta)
- fix for Dark Seal and Vapor Trail (now sound does not change it's pitch/speed during attract mode/game)
- Better NMI value for Jail Break (proper audio pitch?)
- fix for Gradius and clones (discrete emulation is bypassed so no strange audio during play)

Video modifications:

- hack for fixing sprites in neogeo driver
- removed custom position and size in astrocde and cidelsa drivers (looks very bad on TV/Arcade monitor)
- restored resolution 256x240 (from 240x240) in remaining games in btime driver as well in scregg driver

- more accurate video timings in Green Beret
- swapped some IRQ handling in megasys1 driver
- video fix for Metamorpic Force (proper offsets)
- small colours fix in nemesis driver (games have now slightly more brighter picture, seems to be more accurate)
- visible area modifications in several games in ssv driver
- visible area modifications for many games in neodriv driver (mostly from 320x224 to 304x224 but for four games even to 288x224 - Zed Blade, Goal!Goal!Goal!, Gururin, Zupapa)
- visible area modification for X-Men, Thunder Cross
- visible area modification Gang Busters, Teenage Mutant Hero Turtles, Bells'n'Whistles [not in ARCADE32/64]
- visible area modification for Battle Rangers, Double Dragon, Double Dragon II, Thunder Strike, China Gate, Garyo Retsuden [not in ARCADE32/64]
- visible area modification for Express Raider, Exzisus, Liberation, Nova 2001, Rock'n'Rage, Riot City, Wonder Boy 3, Aurail [not in ARCADE32/64]
- visible area modification for Mad Crasher, Gladiator 1984, Super Cross II, Jungle King, Sea Fighter Poseidon, Xain'n Sleena [not in ARCADE32/64]
- visible area modification for many games in system1 driver [not in ARCADE32/64]
- some video fixes in taito_f3 driver (continue screen in Greed Seeker is now visible, the same goes to intro text in Arabian Nights)

Misc modifications:

- slow rendering fix for namconb1


32bit build modifications:

- d3d fix for old video cards

GroovyMAME source: here
No nag source: here
Diff files for 204 (must be applied after all other patches): https://mega.nz/#!9pNQCQ4B!4CE6En2W6AAks79uJCm-X4OZkiruJdujq8ox6n-RXFY
Groovymame x32 204 (without D3D9ex, with D3D8 fix): https://mega.nz/#!5wMkDSzC!ch9HzT-A72Y6r_UAxyQifzRonuuaOgDyw4scWveEXOM
Groovymame x64 204 (with D3D9ex): https://mega.nz/#!h0cmmKDY!_nZWQ6BDdoiECtvNZDcb9mazid9SEHuweSbWMuEQHms
« Last Edit: December 02, 2018, 06:32:35 am by haynor666 »

mdd45

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 40
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #1 on: July 19, 2017, 06:10:47 pm »
Thank you!!!

Paradroid

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 616
    • SCART Hunter
Re: GroovyMAME/ARCADE32
« Reply #2 on: July 19, 2017, 07:53:53 pm »
Unreal!

Sent from my SM-A300Y using Tapatalk

My MAME/SCART/CRT blog: SCART Hunter

keropi

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 159
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #3 on: July 20, 2017, 02:58:56 am »
very nice, thanks for sharing!
Is this an arcade-only build or does it also contain MESS?

Jonny G

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
Re: GroovyMAME/ARCADE32
« Reply #4 on: July 20, 2017, 06:59:57 am »
See top of OP's post, looks like it's based on Arcade, a fork of MAMEUIFX, so no MESS.

keropi

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 159
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #5 on: July 20, 2017, 09:40:36 am »
I am not familiar with "arcade" so it's good to hear there is no MESS in this one :)

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #6 on: July 20, 2017, 11:10:37 am »
MAME = old MAME +MESS so my build is with MESS part as well just like Groovymame.

keropi

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 159
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #7 on: July 20, 2017, 11:42:56 am »
^ allright then , thanks for the clarification :)

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #8 on: July 20, 2017, 12:47:38 pm »
For clarification - ARCADE is build upon old MAMEUIFX code. MAMEUIFX was arcade only build so ARCADE is also MAME with only arcade part, hence the new simple name.

Calamity

  • Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6196
Re: GroovyMAME/ARCADE32
« Reply #9 on: July 20, 2017, 02:42:07 pm »
Glad to see this hybridisation.
Important note: posts reporting GM issues without a log will be IGNORED.
Steps to create a log:
 - From command line, run: groovymame.exe -v romname >romname.txt
 - Attach resulting romname.txt file to your post, instead or pasting it.

CRT Emudriver, VMMaker & Arcade OSD downloads, documentation and discussion:  Eiusdemmodi

marcelosofth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #10 on: July 20, 2017, 03:26:54 pm »
Yesssssssssssssssss, vivaaaaaaaaaaa, tks my friend (Windows XP - 32bits foreverrrrrr)  :applaud: :cheers:

Nodoyuna

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 26
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #11 on: July 21, 2017, 05:56:15 am »
Tried yesterday and works great
Thanks a lot, it's always better to have GM in sync with the latest official version

Recapnation

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 121
    • Eiusdemmodi
Re: GroovyMAME/ARCADE32
« Reply #12 on: July 21, 2017, 11:58:45 am »
- hack for fixing sprites in neogeo driver

What does this achieve, exactly? Fixing Terry's stage in Garou?

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac

funkycochise

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • 8 bits generation
Re: GroovyMAME/ARCADE32
« Reply #14 on: July 22, 2017, 06:18:50 am »
Thank you haynor. I will try this out asap.


Recapnation

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 121
    • Eiusdemmodi
Re: GroovyMAME/ARCADE32
« Reply #15 on: July 22, 2017, 07:31:37 am »
It's sad they're fixing non-bugs whereas this remains for so many years. Shouldn't be too hard to figure out a hack -- MAME must be the only emulator where you find it.

But hey, what do I know.




totozero

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #16 on: July 23, 2017, 05:30:51 pm »
Hi haynor,
thanks for making this build.

Would it be possible to make another d3dex 64 version with a faster slider for the cpu overclock option ?
Default is slow as hell and it takes ages to reach 200%.
I use it all the time for mvs roms such as mslug and so...

if I do remember the file to be modified is ui.cpp

Code: [Select]
// add CPU overclocking (cheat only)
slider_index = 0;
if (machine.options().cheat())
{
for (device_execute_interface &exec : execute_interface_iterator(machine.root_device()))
{
void *param = (void *)&exec.device();
std::string str = string_format(_("Overclock CPU %1$s"), exec.device().tag());
sliders.push_back(slider_alloc(machine, SLIDER_ID_OVERCLOCK + slider_index++, str.c_str(), 10, 1000, 2000, 1, param));
}
}

and replace with

Quote
// add CPU overclocking (cheat only)
   slider_index = 0;
   if (machine.options().cheat())
   {
      for (device_execute_interface &exec : execute_interface_iterator(machine.root_device()))
      {
         void *param = (void *)&exec.device();
         std::string str = string_format(_("Overclock CPU %1$s"), exec.device().tag());
         sliders.push_back(slider_alloc(machine, SLIDER_ID_OVERCLOCK + slider_index++, str.c_str(), 50, 1000, 2000, 1, param));
      }
   }

I usually make my own builds but I'd like to try yours :wink:

Many thanks, mate.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #17 on: July 24, 2017, 05:27:33 am »
Does moving slider with CTRL pressed is not enough? It's really fast for me.

Nodoyuna

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 26
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #18 on: July 24, 2017, 06:18:51 am »
Hi
Your version should not have the initial info screens before entering the game, right?
I ask because I keep getting them... Should I activate or deactivate anything in GM?
Thanks in advance

totozero

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #19 on: July 24, 2017, 08:10:46 am »
Does moving slider with CTRL pressed is not enough? It's really fast for me.

 :dizzy: .... Ooooops... Really ?
I've been in Mame for years and I didn't even notice that holding ctrl enabled "fast-slinding". Guess you can learn something every day even with dumb questions  ::)
Anyways, thanks for the input.


haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #20 on: July 24, 2017, 08:57:31 am »
Hi
Your version should not have the initial info screens before entering the game, right?
I ask because I keep getting them... Should I activate or deactivate anything in GM?
Thanks in advance

Set:

skip_gameinfo             1

in mame.ini

Nodoyuna

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 26
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #21 on: July 24, 2017, 11:44:45 am »
Thanks, I'll try that

funkycochise

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • 8 bits generation
Re: GroovyMAME/ARCADE32
« Reply #22 on: July 28, 2017, 01:17:54 am »
Does moving slider with CTRL pressed is not enough? It's really fast for me.
didnít know that slider option through 2 key, above tab key
always thought I was only for volume settings.

for cpu boost, I only used ins key to speed up long boot time
like gradius (before finally ends with a save state for instant boot for that game)

Thank you guys for interesting tips and tricks out there.  :cheers:

also I tested your build haynor : great job !
especially for your precise fixes : will adopt it on the cab.
Iíll keep an older version in second just for kungfum/spartanx
discrete emulation for sounds make them too low and not well balanced.
« Last Edit: July 28, 2017, 01:25:00 am by funkycochise »

markran

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
Re: GroovyMAME/ARCADE32
« Reply #23 on: August 05, 2017, 11:30:56 pm »
Thanks Haynor666, this looks like the MAME build I need as I'm updating my 10 year-old MAME cab from MAME .120. The cab features WinXP/32, a hacked ATI 9250 and a 25" Wells Gardner 800 x 600 multi-sync CRT.

One question, I have the full (merged) .187 ROM set but the EXTRAS and VIDEOSNAPS folders I could grab are .188. Does anyone think I'll run into issues running them together?
« Last Edit: August 05, 2017, 11:33:03 pm by markran »

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #24 on: August 06, 2017, 04:04:12 am »
Some extras and videosnaps might need renaming but that's all.

funkycochise

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • 8 bits generation
Re: GroovyMAME/ARCADE32
« Reply #25 on: August 09, 2017, 12:26:01 pm »
Hi haynor666,

while I have a bit of spare time, I tried to compile my own mame build.
I set the build environement as describe in mamdev. Got the current version with git : all went fine and had a shiny mame64.exe, but 188 version.
Then I tried to build a groovy version, as you describe here the patch used.
I have downloaded 187s file and made the folder accessible trough the win32env.bat console.
I then had the patch package tool to the environement.
I tested it with suppression.txt for nag screen as it only touch 2 files.
I run "make" after a while I got my mame64.exe, producing the ini file including the skip_gameinfo entry : all right !

I then tried to build the previous 0186 version, with groovypatch.
when I patched with the d3d9ex.diff and the groovymame diff, I got errors (but it is supposed to be made for this version). Without surprises,
"make" processed failed. I could be more precise with the error if you want.
I just wanted to know witch diff you pass and the order.

Sorry for my dumb questions.
Pierre KFY.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #26 on: August 09, 2017, 03:37:08 pm »
No nag was fro 187, my patch also but groovymame patch was originally for 186. You can get no nag 186 but sadly my patch will not work with 186.

funkycochise

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • 8 bits generation
Re: GroovyMAME/ARCADE32
« Reply #27 on: August 10, 2017, 04:06:57 am »
I don't want to go off topic on your topic : I'll open mine, regarding my patching problem, with more details.
http://forum.arcadecontrols.com/index.php/topic,154967.0.html
« Last Edit: August 10, 2017, 05:21:36 am by funkycochise »

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #28 on: October 30, 2017, 03:44:24 pm »
New version 191 - no new stuff, just to stay inline with official mame.

For now only 32 bit edition: https://mega.nz/#!MgtmUb6S!hVEib8rh_UOTsN0ubixoi-DUveq4hcZ5ynCfb__6sBw

Sky25es

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 106
Re: GroovyMAME/ARCADE32
« Reply #29 on: October 30, 2017, 06:47:23 pm »
New version 191 - no new stuff, just to stay inline with official mame.

For now only 32 bit edition: https://mega.nz/#!MgtmUb6S!hVEib8rh_UOTsN0ubixoi-DUveq4hcZ5ynCfb__6sBw
Wow! Thanks!
 :notworthy:

b4nd1t0

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 44
    • b4nd1t0's repository
Re: GroovyMAME/ARCADE32
« Reply #30 on: October 30, 2017, 06:55:25 pm »
New version 191 - no new stuff, just to stay inline with official mame.

For now only 32 bit edition: https://mega.nz/#!MgtmUb6S!hVEib8rh_UOTsN0ubixoi-DUveq4hcZ5ynCfb__6sBw
XP compatible+groovy+suppression?

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #31 on: October 30, 2017, 06:58:02 pm »
As always - it's XP comp. (should be just like any other version, I didn't tested on my PC yet). Please read first post.

raibol1

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #32 on: October 31, 2017, 06:22:10 am »
Hallo,

any chance to get a 191 groovymame 64bit, D3D9ex, supression patch, arcade-only version??

Greets

Rainer

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #33 on: October 31, 2017, 06:44:52 am »
Before I release other version I have to test this one. It's based on GM 190 patch, still there isn't official GM 191 patch.

NOTE. Haze rewrote SH3 emulation so CV1k games are now much faster. Worth to check if older hardware manage to emulate those games at 100% speed.
« Last Edit: October 31, 2017, 12:28:50 pm by haynor666 »

Josef1975

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 21
    • MY ARCADE CABINET
Re: GroovyMAME/ARCADE32
« Reply #34 on: November 02, 2017, 05:38:04 am »
Hi haynor666, thanks for your great work!!
« Last Edit: November 19, 2017, 06:16:38 pm by Josef1975 »

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #35 on: November 02, 2017, 03:05:37 pm »
Updated first post with new links.

Raibol1 this is GM with D3D9ex but not arcade only. It really does not make sense build arcade only release.
« Last Edit: November 02, 2017, 03:09:13 pm by haynor666 »

raibol1

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #36 on: November 02, 2017, 03:41:28 pm »
Thank you very much for this new releases!!!
Arcade only ist not so necessary, in my 2 Arcade cabinets the full version is also great!!

Rainer

michino

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #37 on: November 03, 2017, 12:03:29 pm »
Thanks haynor666,

Only one question, we must only replace the Groovymame64.exe? the other archives we leave the old ones?

Thanks

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #38 on: November 03, 2017, 02:39:23 pm »
All other files (plugins, artwork) You should get from official mame 191 archive.

Dr.Venom

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 270
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #39 on: November 04, 2017, 04:43:34 am »
Updated first post with new links.

Raibol1 this is GM with D3D9ex but not arcade only. It really does not make sense build arcade only release.

Thanks for posting these builds  :)

Just wondering, would it be useful to post some of these issues (and fixes) at http://mametesters.org/? For example the below seem like issues that may be addressed in the MAME core.

Especially when issue is properly documented and code solution is already included in the description, in my experience they mostly get fixed in the core..

- Bonze Adventure protection fix (no more errors when You die)
- frequency modification for several audio chips for proper audio speed (Aliens, Crime Fighters, Simpsons, Vendetta)
- audio fix for Dark Seal and Vapor Trail (now sound does not change it's pitch/speed during attract mode/game)
- more accurate video timings in Green Beret
- proper video timmings in Iron Horse (very usefull for TV/Arcade monitor)
- Better NMI value for Jail Break (proper audio pitch?)
- swapped some IRQ handling in megasys1 driver
- video fix for Metamorpic Force (proper offsets)
- slow rendering fix for namconb1


« Last Edit: November 04, 2017, 04:49:21 am by Dr.Venom »

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #40 on: November 04, 2017, 10:47:11 am »
All those fixes are either hacks so won't be in official mame or changes were not accepted by mamedev (like Iron Horse fix).

Some of those are really not correct (like Neo Geo resolutions changes) - only to improve display/sound not matter if real hardware had or had not such issues/behaviour.

Some changes are just guess or some logical assumptions but not verified.

michino

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #41 on: November 04, 2017, 03:37:11 pm »
All other files (plugins, artwork) You should get from official mame 191 archive.

Thanks a lot.

Any change to do in the mame.ini from 0.189 version?

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #42 on: November 05, 2017, 06:34:44 am »
Probably not.

AstroFan

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
Re: GroovyMAME/ARCADE32
« Reply #43 on: November 08, 2017, 03:26:30 pm »
Can you build a 32bit version without the "Your graphics card does not support non-power-of-two textures" error?
It was discussed here: http://forum.arcadecontrols.com/index.php/topic,155585.0.html

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #44 on: November 10, 2017, 07:28:27 am »
Done, please use link in first post and let me know if this works.

AstroFan

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
Re: GroovyMAME/ARCADE32
« Reply #45 on: November 11, 2017, 07:42:15 am »
Works perfectly, Cave performance has improved 2x! Thanks!

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #46 on: November 13, 2017, 02:22:35 pm »

funkycochise

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • 8 bits generation
Re: GroovyMAME/ARCADE32
« Reply #47 on: November 14, 2017, 02:19:41 pm »
Temporary build using git from yesterday: https://mega.nz/#!hkkViLBR!1Z5op_JbX_gpgrdJJDoC40bgysjjQ6WDnjjMuL79DZ8
quick tested tonight, brilliant. Many thanks for the preview !

michino

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #48 on: November 14, 2017, 04:50:42 pm »

AstroFan

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
Re: GroovyMAME/ARCADE32
« Reply #49 on: November 16, 2017, 07:39:33 am »
The git version has the "non-power-of-two textures" error again  :'(

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #50 on: November 16, 2017, 07:43:37 am »
Ups, I forgot to apply this patch. I'll compile latest GIT with this patch as well.

BTW. You could try PGM2 emulation after I made new test build ;)

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #51 on: November 16, 2017, 04:39:52 pm »
New version from today - [removed]
« Last Edit: December 05, 2017, 04:18:42 pm by haynor666 »

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #52 on: December 05, 2017, 04:19:39 pm »
Version 192 is out. Added solution for bypassing message "non-power-of-two textures".

lettuce

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1857
  • Make It So!
Re: GroovyMAME/ARCADE32
« Reply #53 on: December 16, 2017, 11:58:39 am »
Thank you!

funkycochise

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • 8 bits generation
Re: GroovyMAME/ARCADE32
« Reply #54 on: December 16, 2017, 09:15:24 pm »
Thank you haynor.
 :applaud:

antoniomauro

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #55 on: January 09, 2018, 03:14:35 am »
Are 0.192 diff compatible with 0.193 source?

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #56 on: January 09, 2018, 07:26:35 am »
I have 193 diff created but I didn't build 193 so far. I don't have enough time fpr my hobby right now.

Josef1975

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 21
    • MY ARCADE CABINET
Re: GroovyMAME/ARCADE32
« Reply #57 on: January 27, 2018, 10:41:39 am »
Hi, any news about .193 release?
In any case really thanks for your Great work!



haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #58 on: January 28, 2018, 02:03:58 pm »
It's too late to publish 193 so wait for 194 :)

Josef1975

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 21
    • MY ARCADE CABINET
Re: GroovyMAME/ARCADE32
« Reply #59 on: January 28, 2018, 03:48:57 pm »
ok thanks!!!  ;D

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #60 on: February 03, 2018, 10:34:30 am »
Version 194 is out. Temporary only 64bit build and without neo-geo resolutions changes.

funkycochise

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • 8 bits generation
Re: GroovyMAME/ARCADE32
« Reply #61 on: February 03, 2018, 11:55:16 am »
 :applaud:

alex2005

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 59
  • I want to build my own arcade controls!
yRe: GroovyMAME/ARCADE32
« Reply #62 on: February 03, 2018, 03:06:20 pm »
whats behind these neo geo resolutions changes? is this an issue?

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #63 on: February 03, 2018, 04:14:58 pm »
Solved. I simply miss some declarations in include neogeo.h  ;D

Compilation errors in 32 bit env - sorry, no build this time.
https://github.com/mamedev/mame/issues/2936
- SOLVED by compiling with older compiler.
« Last Edit: February 10, 2018, 05:22:14 am by haynor666 »

alex2005

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 59
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #64 on: February 04, 2018, 04:27:13 am »
thank you so much!!! awesome build!!

Josef1975

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 21
    • MY ARCADE CABINET
Re: GroovyMAME/ARCADE32
« Reply #65 on: February 05, 2018, 03:20:14 pm »
fantastic! thank you
will test in my ladercab soon!  :notworthy:

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #66 on: February 06, 2018, 11:38:13 am »
Test build:

Cut visible areas in following games, removing black borders:
Double Dragon, Double Dragon II, Thunder Strike
Super Cross II
Mad Crush, Gladiator 1984
China Gate
Wonder Boy 3, Riot City, Aurail
Wonder Boy
Xain'n'Sleena
Battle Rangers
Express Raider
Rock'n'Rage
Exzisus
Gang Busters
Garyo Retsuden
Liberation
Cosmo Gang the Puzzle, Tinkle'n'Pit now whole driver needs this
Nova 2001
Jungle King, Sea Fighter Poseidon
Teenage Mutant Hero Turtles, Bells'n'Whistles
various games in system1 driver

https://mega.nz/#!ZpFyETwI!upZvi6b4k8OKedvy1S-REH_jcfKD6nTQl94GjG5mvBo
« Last Edit: February 09, 2018, 11:41:40 am by haynor666 »

funkycochise

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • 8 bits generation
Re: GroovyMAME/ARCADE32
« Reply #67 on: February 07, 2018, 02:15:30 pm »
you have removed your test build,
I was curious about it  :-[

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #68 on: February 07, 2018, 04:53:29 pm »
I'm buidling it again with additional changes, just give me 30 mins.

funkycochise

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • 8 bits generation
Re: GroovyMAME/ARCADE32
« Reply #69 on: February 07, 2018, 07:30:35 pm »
thank you, I was just feared that you changed your mind.

there is no hurry  :applaud:

Iíll test it tomorrow

funkycochise

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • 8 bits generation
Re: GroovyMAME/ARCADE32
« Reply #70 on: February 11, 2018, 10:19:47 am »
tested quicky with ddragon, wboy, wb3, exprraid
works really nicely. Thank you for this work
adopted !

 :cheers:

keilmillerjr

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1486
  • Web Developer.
Re: GroovyMAME/ARCADE32
« Reply #71 on: February 26, 2018, 12:39:43 pm »
Thank you for this build. I cant wait to try it with the neo geo resolution mod!

alex2005

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 59
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #72 on: March 09, 2018, 06:09:01 am »
is there any 0.195 nonag release somewhere yet? :)

keilmillerjr

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1486
  • Web Developer.
Re: GroovyMAME/ARCADE32
« Reply #73 on: March 18, 2018, 06:36:08 am »
is there any 0.195 nonag release somewhere yet? :)

+1 :)

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #74 on: March 20, 2018, 03:27:19 pm »
I don't have time right now. Since mame have now proper c-chip emulation probably next version will 196 or 197.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #75 on: March 31, 2018, 04:37:13 pm »
Version 196 out. For now without Iron Horse modification.
« Last Edit: March 31, 2018, 06:16:27 pm by haynor666 »

funkycochise

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • 8 bits generation
Re: GroovyMAME/ARCADE32
« Reply #76 on: April 01, 2018, 03:05:19 am »
as always, thank you !
Thanks for your effort in maintaining this build.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #77 on: April 01, 2018, 12:41:28 pm »
UPDATE: Iron Horse modification is fixed, builds will be updated shortly.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #78 on: April 02, 2018, 10:55:37 am »
I forgot to mention that version 200 will be probably last one with support for 32 build. Right now saturn.cpp cannot be compiled with latest compiler. Older compiler works but in some time it will be probably abandoned so it's matter of time unless someone fix saturn.cpp.

Of course there is still source provided so everybody can do it by yourself.

alex2005

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 59
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #79 on: April 12, 2018, 04:05:04 pm »
thank you so much! !
best compilation ever! !

keilmillerjr

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1486
  • Web Developer.
Re: GroovyMAME/ARCADE32
« Reply #80 on: May 12, 2018, 05:42:19 am »
free bump - 197 has some additions to the neo geo driver.

abispac

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 916
Re: GroovyMAME/ARCADE32
« Reply #81 on: May 12, 2018, 10:10:53 am »
could you ad no saveste mesages when they are loaded please, i could share mi machinne.cpp if you need it, thanks.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #82 on: May 18, 2018, 02:10:56 am »
I'm planning to release 198 skipping 197.

abispac, I prefer to leave those messages as they are but source for my modifications is available so You can always build Your own version. If there is problem I can build 196 right now just for You with this modification.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #83 on: June 02, 2018, 03:37:13 pm »

antoniomauro

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #84 on: June 08, 2018, 06:40:23 am »
great!
waiting for the diff to compile the 32bit version

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #85 on: June 08, 2018, 02:21:01 pm »
Here is diff package but please remember it's unofficial for now: https://mega.nz/#!t8sgTR6L!t153h7mt0kFnJZglKLwt2vEr5Km8DNhckFxhZReOg9s

ckong

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 151
  • Retro Games forever!
Re: GroovyMAME/ARCADE32
« Reply #86 on: June 25, 2018, 04:38:42 am »
Thx for the 32build of 0.196.  :)

cyb

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
Re: GroovyMAME/ARCADE32
« Reply #87 on: July 06, 2018, 01:47:26 pm »
Do you plan on releasing an 0.199 build? Killer Instinct is broken on 0.198.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #88 on: July 08, 2018, 06:35:41 am »
Calamity didn't released 199 GM source so I'm not planning releasing 199 as well.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #89 on: July 26, 2018, 03:59:19 am »
Test build for version 200 (still based on groovymame patch 196).

Removed Iron Horse patch - no longer needed.

keilmillerjr

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1486
  • Web Developer.
Re: GroovyMAME/ARCADE32
« Reply #90 on: July 28, 2018, 08:53:42 am »
Thank you so much! Advancement has been quick, and I think 0.200 might be a version I stick with for a while.

alex2005

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 59
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #91 on: August 23, 2018, 07:55:41 am »
any plans on a 0.200 release? :)

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #92 on: August 23, 2018, 09:02:33 am »
I think after 200 test release I'll go straight to 201. After all it's just one week.

anchounio

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 67
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #93 on: September 05, 2018, 07:06:13 am »
I think after 200 test release I'll go straight to 201. After all it's just one week.

We're looking forward to it :)

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #94 on: September 05, 2018, 03:05:41 pm »
I'm waiting for official groovymame 201 release.

anchounio

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 67
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #95 on: September 07, 2018, 05:26:47 am »
I'm curious!
Considering ARCADE is the follow-up to mameuifx, Does ARCADE include all the enhancements of mameuifx?
I mean, all this list:
http://mame32fx.altervista.org/features.htm

Therefore, does your groovymame distribution include them all ?   :notworthy: :notworthy: :applaud:

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #96 on: September 07, 2018, 05:55:22 am »
You are looking at distant past. MAMEUIFX is dead - we have now ARCADE32/64 - http://arcade.mameworld.info Since that time many changes has been made in ARCADE32/64. Some new features were added, some old code is no longer needed.

This is modification for groovymame so it does not have GUI just like ARCADE32/64 or MAMEUI64 so everything related to GUI is not present here. Additionally some old code like samples support for Toaplan games it's not here because MAME have now proper code/roms for sound. It does not have any extra game like groovymame but also just like ARCADE32/64.

Since it's based on groovymame it's full MAME build not ARCADE only just like old MAMEUIFX and ARCADE32/64.

raibol1

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #97 on: October 12, 2018, 11:54:41 am »
Hallo,

will u release a 202 version (64bit, d3d9ex, supression)?

Greets

raibol

schmerzkaufen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • I want a large cream coffee
Re: GroovyMAME/ARCADE32
« Reply #98 on: October 13, 2018, 02:12:01 am »
Waiting for 0.203 would make more sense, since there will be a lot of interesting fixes from official MAME.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #99 on: October 13, 2018, 01:31:31 pm »
I'll try to build 202.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #100 on: October 13, 2018, 04:52:42 pm »
Uploaded version 202 but only x64 build. Link in first post.

BTW. schmerzkaufen, what interesting will be in 203? I'm sorry but I'm focused on amiga right now and I miss a lot of changes.

schmerzkaufen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • I want a large cream coffee
Re: GroovyMAME/ARCADE32
« Reply #101 on: October 14, 2018, 05:06:22 am »
BTW. schmerzkaufen, what interesting will be in 203? I'm sorry but I'm focused on amiga right now and I miss a lot of changes.
http://www.mameworld.info/ubbthreads/showthreaded.php?Cat=&Number=378927&page=0&view=expanded&sb=5&o=&fpart=1&vc=1
I'm mostly interested in the finally fixed INI system, and changes to HLSL (not all featured here but we'll see when we try)
There will be a ton on the game/input/optimization side too, that post was only of the 10th of oct. Big release coming.
Combined, upcoming baseline MAME's + Calamity's recent fixes to GM will make an overall better working, more powerful MAME, and I'm going to use that to put to test Calamity's changes in particular, under various conditions, thoughout this fall/winter.
« Last Edit: October 14, 2018, 05:08:46 am by schmerzkaufen »

raibol1

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #102 on: October 14, 2018, 07:56:27 am »
@haynor666,

thank you very much, i will try it soon!!

I myself have still problems compiling it.

Greets

Rainer

raibol1

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #103 on: October 14, 2018, 11:32:41 am »
Hallo,

i just tested your new build and works like a charm!!!

Thank you for supplying us with these builds.

Greets

Rainer

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #104 on: October 15, 2018, 02:30:37 am »
Good to know beacuse I only started my build on PC with LCD with just one game :)

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #105 on: November 03, 2018, 07:52:38 am »
Release 203 is out.

schmerzkaufen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • I want a large cream coffee
Re: GroovyMAME/ARCADE32
« Reply #106 on: November 03, 2018, 11:51:20 am »
Thanks a lot!  ;)

edit: I've probably done something wrong because all the poker n'stuff games still show in my list... will try a fresh install.
« Last Edit: November 03, 2018, 12:10:43 pm by schmerzkaufen »

keilmillerjr

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1486
  • Web Developer.
Re: GroovyMAME/ARCADE32
« Reply #107 on: November 03, 2018, 12:25:43 pm »
Thank you! This is a good release! I can now update my romset, got the haynor version for Neo Geo garbage fixes, got the choccyhobnob Mac OS X and rPi versions... itís a good day.  :)

schmerzkaufen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • I want a large cream coffee
Re: GroovyMAME/ARCADE32
« Reply #108 on: November 03, 2018, 12:35:56 pm »
Yup the useless roms are still showing and all the clones are missing.

Well damn, actually since I have changed my roms for merged ones, ARCADE probably doesn't work with those.

Ugh I don't understand the first thing about clrmamepro so it'll be a pain.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #109 on: November 03, 2018, 12:43:10 pm »
Please remember - it's full MAME release not arcade only.

schmerzkaufen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • I want a large cream coffee
Re: GroovyMAME/ARCADE32
« Reply #110 on: November 03, 2018, 12:50:21 pm »
Since when? I think I can remember having 'groovyarcade' builds that only showed a clean arcade games list (which is the point of ARCADE tbh...)

Also I'm not joking it's somehow managed to hide all clones I don't know why.

Ok I have to investigate this.
« Last Edit: November 03, 2018, 12:51:58 pm by schmerzkaufen »

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #111 on: November 03, 2018, 12:59:22 pm »
My own build of groovymame is always full it was for very long time.

schmerzkaufen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • I want a large cream coffee
Re: GroovyMAME/ARCADE32
« Reply #112 on: November 03, 2018, 01:06:16 pm »
Must have mixed both in my mind then. Oh well.

edit: wait, I still have one of your 'arcade only' builds it's 0.186, that wasn't so long ago. Just curious why did you stop making those?
« Last Edit: November 03, 2018, 01:44:25 pm by schmerzkaufen »

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #113 on: November 03, 2018, 03:32:20 pm »
186 was before I start this topic. I stopped making arcade only builds because groovymame official is also full MAME.

schmerzkaufen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • I want a large cream coffee
Re: GroovyMAME/ARCADE32
« Reply #114 on: November 04, 2018, 04:19:42 am »
No problem I understand. A bit sad though, I know no other way to get a similar clean list without hand-editing a 10,000+ lines file.
If the romsets themselves were built in separate parts by categories that wouldn't be such a big deal.

keilmillerjr

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1486
  • Web Developer.
Re: GroovyMAME/ARCADE32
« Reply #115 on: November 04, 2018, 11:17:04 am »
0.203 diff files?

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #116 on: November 04, 2018, 06:36:41 pm »
Diff 202 works fine except neogeo.cpp part. For a moment please use file from arcade32/64 source.

m.andrade1

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 96
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #117 on: November 08, 2018, 07:03:20 am »
Hello haynor666
Any plans for 32bit 0203b version?

Thanks a lot
Marcos
« Last Edit: November 08, 2018, 10:46:26 am by m.andrade1 »

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #118 on: November 09, 2018, 02:03:51 pm »
Uploaded but since I don't have XP I can't test it. Let me know if it works.

marcelosofth

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #119 on: November 12, 2018, 05:01:20 am »
Hello  Haynor666, I would like to know why the Kung Fu Master that has had in the past the SOUND ok, after the new versions never again the SOUND is ok, you know why?

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #120 on: November 12, 2018, 05:57:57 am »
It was explained many times before - MAME have now discrete sound emulation which is still not perfect and very CPU demanding.

m.andrade1

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 96
  • I want to build my own arcade controls!
Re: GroovyMAME/ARCADE32
« Reply #121 on: November 19, 2018, 11:46:56 am »
Hello haynor666
Thanks a lot for 32bit version, will test on XP and let you know the results

Thanks
Marcos

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #122 on: December 02, 2018, 06:36:41 am »
New version just because I might now have enough time during Christmas.

josete2k

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 36
Re: GroovyMAME/ARCADE32
« Reply #123 on: December 02, 2018, 10:15:55 am »
Thanks.
Can you please explain about the D3D8 fix?

My cabinet is running under XP 32bit.

haynor666

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1146
  • retro maniac
Re: GroovyMAME/ARCADE32
« Reply #124 on: December 03, 2018, 03:52:57 am »
D3D8 fix is added solution for bypassing message "non-power-of-two textures" for old DX8 video cards. At some point this fix and x32 build will be abandoned.

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31