Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Monitor position adjustments?  (Read 330 times)

0 Members and 1 Guest are viewing this topic.

Foxsec

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • I want to build my own arcade controls!
Monitor position adjustments?
« on: July 01, 2017, 09:05:29 am »
Hi guys. I'm struggling to find a CRT which will fit my cab (21') but I have found plenty of LCD screens which are 12.5'

So my question is, would I be able to put a larger monitor in the cab but use the adjustment settings to pull the picture in some so it fits?

any advise on this would be greatly appreciated

mourix

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 136
Re: Monitor position adjustments?
« Reply #1 on: July 12, 2017, 06:51:00 am »
CRT's can usually shrink a lot if you have access to the service menu, but LCD's depend on the brand as you usually only get a fine adjustement.

If you use a PC or raspberri pi as a source, you will be able change it all in software, though.

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31