April 25, 2024, 02:23:54 am
Home
Help
Search
Login
Register
News:
Support this site
Shop
Amazon Arcade Stuff
through our link. Thank you!
Forum notices to gmail.com addresses are working. Microsoft addresses are still not.
The NEW Build Your Own Arcade Controls
|
Main
|
Audio/Jukebox/MP3 Forum
|
Rowe CD 100A
Main
Restorations
Software
Audio/Jukebox/MP3
Everything Else
Buy/Sell/Trade
Project Announcements
Monitor/Video
GroovyMAME
Merit/JVL Touchscreen
Meet Up
Retail Vendors
Driving & Racing
Woodworking
Software Support Forums
Consoles
Project Arcade
Reviews
Automated Projects
Artwork
Frontend Support Forums
Pinball
Forum Discussion
Old Boards
Raspberry Pi & Dev Board
controls.dat
Linux
Miscellaneous Arcade
Wiki Discussion
Old Archives
Lightguns
Arcade1Up
Try the site in https mode
Site News
Unread posts
|
New Replies
|
Recent posts
|
Rules
|
Chatroom
|
Wiki
|
File Repository
|
RSS
|
Submit news
« previous
next »
Send this topic
Print
Pages: [
1
]
Go Down
Author
Topic: Rowe CD 100A (Read 2450 times)
0 Members and 1 Guest are viewing this topic.
DaveN
Trade Count:
(
0
)
Full Member
Offline
Posts: 14
Last login:August 12, 2023, 12:26:17 pm
I want to build my own arcade controls!
Rowe CD 100A
«
on:
October 08, 2017, 05:36:53 pm »
I'm new here so I hope this post is OK. I have a Rowe CD100A Jukebox it was playing fine and then the sound went down real low and was distorted. Pulled the amp and all 4 8 amp fuses were bad.
What would cause this to just happen??
Thanks Dave
Logged
Ken Layton
Guru
Trade Count:
(
+1
)
Full Member
Offline
Posts: 7061
Last login:October 12, 2021, 12:25:59 am
Technician
Re: Rowe CD 100A
«
Reply #1 on:
October 08, 2017, 10:50:46 pm »
Sounds like all four of the output transistors are bad. Did you have any external speakers connected to the jukebox?
Logged
ami-man
Trade Count:
(
0
)
Full Member
Offline
Posts: 1085
Last login:July 19, 2020, 01:22:45 pm
Re: Rowe CD 100A
«
Reply #2 on:
October 09, 2017, 09:15:00 am »
Hi Dave,
I agree with Ken, it sounds as if you have overloaded the four outut transistors, if you have a transistor checker then take the transistors out one at a time and check them.
Regards
Alan
Alan Hood
ami-man
UK
Logged
DaveN
Trade Count:
(
0
)
Full Member
Offline
Posts: 14
Last login:August 12, 2023, 12:26:17 pm
I want to build my own arcade controls!
Re: Rowe CD 100A
«
Reply #3 on:
October 09, 2017, 10:25:45 am »
No extra speaker it was playing and just lost the sound
Logged
ami-man
Trade Count:
(
0
)
Full Member
Offline
Posts: 1085
Last login:July 19, 2020, 01:22:45 pm
Re: Rowe CD 100A
«
Reply #4 on:
October 10, 2017, 09:41:24 am »
Hi Dave,
Replace the four fuses with 5 amp fuses, if they blow again you will have to send your amplifier to a Rowe Ami specialist for testing/repair.
Regards
Alan
Alan Hood
ami-man
UK
Logged
DaveN
Trade Count:
(
0
)
Full Member
Offline
Posts: 14
Last login:August 12, 2023, 12:26:17 pm
I want to build my own arcade controls!
Re: Rowe CD 100A
«
Reply #5 on:
October 30, 2017, 01:47:32 pm »
You are correct the output are bad and one driver test bad also.
Thank You for your help
Logged
Send this topic
Print
Pages: [
1
]
Go Up
« previous
next »
The NEW Build Your Own Arcade Controls
|
Main
|
Audio/Jukebox/MP3 Forum
|
Rowe CD 100A