Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: R89 e rr3  (Read 207 times)

0 Members and 1 Guest are viewing this topic.

Lawndart

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Analog (mostly)
R89 e rr3
« on: June 13, 2017, 09:04:23 pm »
Hi All,

My R89 is working fine however I get E rr3 displayed momentarily when it turn it on.
In service mode, Er r3 displayed on the CCC.
If I clear the code, it returns immediately when I switch from service to on mode.
I have searched, but no avail.
Thoughts?

Ken Layton

  • Guru
  • Trade Count: (0)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 6720
  • Technician
Re: R89 e rr3
« Reply #1 on: June 13, 2017, 10:45:39 pm »
Error 3 means rom chip Z7 is bad inside the Central Control Computer. You may have to send it (the Central Control Computer board) out for repair.

http://rowejukeboxparts.com/product-category/central-control-computers/

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 906
Re: R89 e rr3
« Reply #2 on: June 14, 2017, 05:39:19 am »
Ken is correct Z7 is defective, you could try replacing this program chip for another one before sending the board to a Rowe Ami specalist, it needs to be programmed for a R-89 jukebox or the digits on the display will be in the wrong location.

Regards
Alan

Alan Hood
ami-man
UK

Lawndart

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Analog (mostly)
Re: R89 e rr3
« Reply #3 on: June 14, 2017, 03:56:19 pm »
Great - thanks guys!

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 906
Re: R89 e rr3
« Reply #4 on: June 15, 2017, 09:19:57 am »
Hi Lastdart,

If you can not locate a chip in the USA I can supply you from the UK.

Regards
Alan

Alan Hood
ami-man
UK
alan-hood@datex.co.uk
« Last Edit: June 15, 2017, 09:21:28 am by ami-man »

Lawndart

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Analog (mostly)
Re: R89 e rr3
« Reply #5 on: June 28, 2017, 07:59:29 pm »
Contacted Bruce at http://rowejukeboxparts.com
He sent me a new EPROM.  I have not installed it yet as all seems to be functioning fine.
Wait or install??  'Tis the question.

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31