Author Topic: PAC drive led question (Read 1768 times)

rob1234 · « **on:** June 01, 2017, 10:34:32 pm »

I have a PAC drive board connected to leds with led blinky. Is there a way to not have the leds light up during computer boot up? I am going to connect a shaker motor to the PAC drive and prefer not to have that going off while the computer boots up. I did just buy a led wiz (in route still). Does that board have a way to avoid the leds lighting up during pc boot up?

Titchgamer · « **Reply #1 on:** June 02, 2017, 01:42:55 am »

Cant remember 100% but ime pretty sure there is a option to turn off the attract mode in the options?

Failing that you could probably clear the built in config file.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: PAC drive led question (Read 1768 times)

rob1234

PAC drive led question

Titchgamer

Re: PAC drive led question