| Arcade Collecting > Restorations & repair |
| Another Asteroids Deluxe HELP PLEASE! |
| << < (9/17) > >> |
| gargoyle73:
more monitor pics - where is model #? |
| chopperthedog:
That is an Electrohome G05-802. I see some severe charring below one of the large caps, it's clear that it's suffered a failure that might need a little more electronic experience than what you may have. There are some folks that you could send the deflection pcb and HV cage to and have them rebuild them for you. In other news, spent some time at the bench and got my thruster box done. The fader is too tall if it were mounted directly to the top of box. I crudely cut some chunks of hdpe to use as internal brackets to mount fader to pcb mounts inside of box. Everything went perfect til I didn't noticed 1 of the screws I used had just a little extra on the tip :banghead: and created the little bump on the box top. :cry: All wired up and the A to D interface that I don't have is ready to be plugged in. :hissy: good day. |
| yotsuya:
--- Quote from: chopperthedog on May 28, 2017, 06:29:05 pm ---All wired up and the A to D interface that I don't have is ready to be plugged in. :hissy: --- End quote --- There should be some ready pretty soon... Sent from my iPhone using Tapatalk |
| gargoyle73:
--- Quote from: chopperthedog on May 28, 2017, 06:29:05 pm ---That is an Electrohome G05-802. I see some severe charring below one of the large caps, it's clear that it's suffered a failure that might need a little more electronic experience than what you may have. There are some folks that you could send the deflection pcb and HV cage to and have them rebuild them for you. In other news, spent some time at the bench and got my thruster box done. The fader is too tall if it were mounted directly to the top of box. I crudely cut some chunks of hdpe to use as internal brackets to mount fader to pcb mounts inside of box. Everything went perfect til I didn't noticed 1 of the screws I used had just a little extra on the tip :banghead: and created the little bump on the box top. :cry: All wired up and the A to D interface that I don't have is ready to be plugged in. :hissy: good day. --- End quote --- Thanks so much Chopper, I see of what you speak, any suggestions on who to contact to do the work? Any chance theres someone who could look at the board, cage, AND game pcb? Would be nice to ship all at same time. Does CoinOp Cauldron still do board work? Also, is it worth trying to replace the caps myself to see if it works after? I assume such an issue has probably hurt other board components. Lunar Lander - SWEET project, beautiful work man, and I assume you seek a switch that can be on an AD console and not be too intrusive, BUT the mammoth original thruster switch on LL sure feels beefy and awesome (below), if you have time please keep posting pics and possible parts list, would love to attempt one once my cab is back to life |
| ChadTower:
Recommendations of techs are always tricky. There are a few out there, but they're not always taking jobs, and they do specialize somewhat. Best thing to do is probably to go to KLOV or a fairly local Facebook group for the hobby and ask there. And then ask for a reference or two since you're new to the hobby. |
| Navigation |
| Message Index |
| Next page |
| Previous page |