Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: NFL Blitz 3.0/NBA Showtime: first kinda working arcade- NEED HELP!  (Read 2815 times)

0 Members and 1 Guest are viewing this topic.

driftingricegod

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:October 23, 2017, 09:38:25 pm
  • I want to build my own arcade controls!
I bought a NFL Blitz 3.0/NBA Showtime 4 player cab last week. I was told that the hard drive was the only issue. So I bought a new PCB solid compact card with the IDE adapter with the ROM U27 & U37. I got the machine to turn on today. But I have a few issues.Any help, I read a bunch of forums and I am just as lost.

#1 I have no sound
it has some errors during the boot screen.
Sound Port Status: BAD
Sound Static RAM: Unknown Error
Sound DRAM: Unknown Error
Sound Tone Status: BAD


#2 None of the player  joysticks (all four of them) work but the buttons work.


« Last Edit: May 28, 2017, 10:50:47 am by driftingricegod »

driftingricegod

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:October 23, 2017, 09:38:25 pm
  • I want to build my own arcade controls!
Re: NFL Blitz 3.0/NBA Showtime: first kinda working arcade- NEED HELP!
« Reply #1 on: June 27, 2017, 10:13:27 pm »
BUMP for help fixing the sound and the joysticks

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7398
  • Last login:Today at 02:14:24 pm
  • I break stuff...then fix it...sometimes
Re: NFL Blitz 3.0/NBA Showtime: first kinda working arcade- NEED HELP!
« Reply #2 on: June 28, 2017, 07:31:28 pm »
I'm going to go ahead and say this.... is dicked, and going to need to be replaced. You shouldn't be able to see....well... any of that.



also...FIRST RULE OF ELECTRONICS:

Thou shalt check voltages.

+5,-5,+12... measure on the board if possible.
« Last Edit: June 28, 2017, 07:34:12 pm by lilshawn »