I tried to play Sega Rally 3 with a Logitech G27. The Gas And Brake pedals are fine in the menu screens, but as soon as I start the actual race, Gas and Brake are REVERSED for some reason.
I checked both axes in the settings and did everything as indicated in the error flow chart. I'm wondering if anyone else experience the same issue.
Anyone played this succesfully with a G27?
i don't have g27, but i have another logitech steering wheel and pedal set, that is for a ps2, but it works on the pc also.
i knew i was asking for trouble, but i went ahead and installed the logitech drivers, and it recognized them, and the settings worked.
so then i started up tecknoparrot 1.2, and sega rally 3, and it actually recognized the wheel and pedals, had to tick all the boxes for
the gas and brake to work properly.
sounds good right...
----------------------------------
first of all, the controls are very sensitive, and since i am only used to a gamepad, i was oversteering completely, which means i drove
zig zag pretty much through the whole course.
after a few more games, it turns out you just have to do very slight movements, and things were improving.
then suddenly after a couple games, the brakes and gas stopped working completely, and even trying to remap those functions to buttons
don't work either.
so i have no idea what happened when everything worked fine before.
in the controller setup, when you go to advanced properties, every other button and function work except the pedals and brakes.
there is a power plug, and separate wires to connect this to the steering wheel unit. the wires are fine, no loose connections.
well, i almost thought about trying it out with daytona 3 (championship), but thats a whole other can of worms.
any ideas?
later
-1