Arcade Collecting > Merit/JVL Touchscreen

Partially working JVL vortex

(1/2) > >>

pappascw:
Bought what I thought was a working vortex from a wholesaler. He probably tested it for 5 min and it worked. I got it to play once now it wants to reload the system.  It starts to do it but reboots at 37% every time. Can I do a clean install off cd rom?  I think it has itouch 8 on it. I've got over 300.00 in it now. 😥

orizzle:
You can hook up an external CD and reinstall the software.

pappascw:
Great thanks. So I guess I have to take the thing apart to get to the cf card?   I wasn't apparent to me so I guess it's in that computer box?  Any breakdown instructions?

mahkeymike:
If its the same as the Retro, its on the bottom side of the jp30 motherboard. You need to take the entire "computer box" out and then remove the jp30 motherboard out of the "computer box" to get to the CF card. Its a real pita. Good luck.

pappascw:
Guys sent me a new pc to put in. Had to pry it out of there. Anyone know a better way to get it out?  Maybe removing the coin slot mechanism may help but didn't figure how to get it out.

Working better but fans will,need to get replaced. Works for a while. Hours but then starts to reboot lockup. Once off for a little it's fine. Fans whine loudly after 45 min to,an hour.

Appreciate and help or advice. 

Navigation

[0] Message Index

[#] Next page