Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Microvetec Monitor issue  (Read 477 times)

0 Members and 1 Guest are viewing this topic.

joeblade2

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 61
  • Scanline Generation!
Microvetec Monitor issue
« on: April 15, 2017, 12:02:40 pm »
Hi Guys, so decided to put my GM setup on my microvetec monitor, very little info exists on this monitor.



Running it in Generic mode VMMAKER, arcade_15 in mame ini.

Running into right edge squish and picture being off to the right and only taking up 2/3 of screen on a few games, most are fine!!

Have attached a couple of offenders:


joeblade2

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 61
  • Scanline Generation!
Re: Microvetec Monitor issue
« Reply #1 on: April 24, 2017, 04:34:45 pm »
Hi guys, I know this hasn't been answered but just thought I'd put up another odd sizing issue i've just found...

Any help would be greatly appreciated on this fellas! :bump

Calamity

  • Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Online Online
  • Posts: 5593
Re: Microvetec Monitor issue
« Reply #2 on: April 24, 2017, 05:31:46 pm »
Please use latest GM version. I suspect this issue was already fixed.

EDIT: I'm seeing the scaling options on mode switch was fixed in 0.016 alpha 5, the exact version you're using, so I'm not sure what's going on.
« Last Edit: April 24, 2017, 05:49:26 pm by Calamity »
Important note: posts reporting GM issues without a log will be IGNORED.
Steps to create a log:
 - From command line, run: groovymame.exe -v romname >romname.txt
 - Attach resulting romname.txt file to your post, instead or pasting it.

CRT Emudriver, VMMaker & Arcade OSD downloads, documentation and discussion:  Eiusdemmodi

joeblade2

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 61
  • Scanline Generation!
Re: Microvetec Monitor issue
« Reply #3 on: April 30, 2017, 07:19:59 pm »
Please use latest GM version. I suspect this issue was already fixed.

EDIT: I'm seeing the scaling options on mode switch was fixed in 0.016 alpha 5, the exact version you're using, so I'm not sure what's going on.

Well if you don't know then it's probably not solvable Calamity.

Will upgrade to newer, older version of everything at some point and see if that fixes anything. :dunno

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31