Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Rockola 469 problem  (Read 437 times)

0 Members and 1 Guest are viewing this topic.

Redkill

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Rockola 469 problem
« on: February 27, 2017, 12:25:57 am »
Hi everybody,

I'm new to this forum.
Since a short time I'm the proud owner of a Rockola 469.
When I bought it it played fine, after transport it started producing a buzzing noise upon power up.
This buzz got bigger when the record started playing.
Did some research and found the schematics online.
After removing the left driver board the jukebox played again and the buzz was gone.
Only the right speaker works.
Apparently R19LR is burned on the left driver board.
Tried replacing the board with a spare one, again this same resistor started smoking.
Does anyone know what causes this to happen?  :-[

Thanks for your help!

whammoed

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2280
  • Crack don't smoke itself
    • NiceMite
Re: Rockola 469 problem
« Reply #1 on: March 03, 2017, 03:30:17 pm »
I would guess something shorted after the driver causing too much load.  Check the speaker wires, speaker, transformer, etc.

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31