Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Sega daytona 4 way shifter wiring into mame driving cabinet.  (Read 623 times)

0 Members and 1 Guest are viewing this topic.

Ward-iz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • I want to build my own arcade controls!
Sega daytona 4 way shifter wiring into mame driving cabinet.
« on: February 25, 2017, 09:22:40 am »
Hi there im trying to wire up a daytona 4 gear shifter into my driving cab . The shifter has 3 micro switches and ive wired them into my u-hid board . Ive tried for hours to get all 4 gears working but it only swaps between 1st and 2nd gear , or 3rd and 4th . Not all 4 gears working at the same time . Ive been trying to configure it for the model 2 emulator so i can play daytona properly .

Any help would be much appreciated.

thanks.

SailorSat

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1104
    • For Amusement Only e.V.
Re: Sega daytona 4 way shifter wiring into mame driving cabinet.
« Reply #1 on: February 25, 2017, 06:21:14 pm »
You will need to use a 3-to-8 decoder IC or some micro controller.
I do all that stuff even without a Joystick ;)
Soft-15kHz, cabMAME, For Amusement Only e.V.


BadMouth

  • Moderator
  • Trade Count: (+6)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7906
  • My arcade cabinet has a cup holder.
Re: Sega daytona 4 way shifter wiring into mame driving cabinet.
« Reply #2 on: February 25, 2017, 06:24:36 pm »
http://forum.arcadecontrols.com/index.php/topic,106709.msg1130578.html#msg1130578

There are several solutions in that thread, but scroll to bottom for the best solutions.
(either adding a switch or using a demultiplexer)

Ward-iz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • I want to build my own arcade controls!
Re: Sega daytona 4 way shifter wiring into mame driving cabinet.
« Reply #3 on: February 27, 2017, 12:49:39 am »
Thanks for the help, I installed a micro switch for each gear and it works perfectly.

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31